03-29-2018, 02:17 AM | #16 |
Join Date: Feb 2018
Posts: 68
|
I got to see the pictures skiforce that did help. Now I'm trying to connect the wiring but I can't seek to connect the gears properly. They all illuminate at once or when others are on. The signals and headlight went on fine. 1st connected easily but the rest are a pain in the butt.
|
|
03-29-2018, 07:57 AM | #17 |
Join Date: Dec 2017
Posts: 87
|
I would pull them out of the plug and connect them individually. There may be something wrong with the plug where they're crossing over their signal.
Last edited by Skiforce75; 03-29-2018 at 08:57 AM. |
|
03-29-2018, 08:12 AM | #18 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,705
|
Nice work guys This will help other switching over to the digital clusters.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
03-29-2018, 11:45 AM | #19 |
Join Date: Feb 2018
Posts: 68
|
Here is a picture of some of the wiring. The storm does not have color matched wires or maybe I'm missing the. The pink matches for 1st. The red and green striped for neutral.
|
|
05-14-2018, 08:34 AM | #20 |
Join Date: Apr 2018
Location: Vermont
Posts: 56
|
Hi, What did you do with the original speed pick up and cable since it needs to be a spacer for the wheel?
|
|
05-15-2018, 08:43 AM | #21 |
Join Date: Dec 2017
Posts: 87
|
I left it right where it is. Someone, I don't remember who, turned that into the speed pick up by mounting the optical sensor in the hole and attaching the magnets inside of the speed pick up. Awesome Idea.
|
|
05-15-2018, 09:10 AM | #22 | |
Join Date: May 2007
Location: Lac Du Flambeau, WI
Posts: 804
|
Quote:
Have you checked it with a GPS yet? Every one i tried was off 5-10% and messing with tire size didn't help a lot.... |
|
|
05-15-2018, 09:38 PM | #23 |
Join Date: Dec 2017
Posts: 87
|
Mine is spot-on. I had to program it though and tell it the diameter in between the two magnets.
|
|
05-17-2018, 03:20 PM | #24 | |
Join Date: Jun 2014
Location: NW Arkansas
Posts: 454
|
Quote:
When it came to programming this was the hardest part for me. I used two magnets and had to set the wheel circumference to "8" which makes no sense but hey it is working great. I used some little rare earth magnets (look like hearing aid batteries) and they stick to the rotor without any epoxy or drilling holes. Also, I had to ride the bike for about 75 miles before the odometer/trip started working. Sambdo told me that with a 19" front wheel I should be using 3 magnets and setting the diameter to around 700 but that didn't work for me. Good luck, this setup is a huge improvement over stock CB gauges and worth the headache of the install.
__________________
2013 SSR XF-250 |
|
|
06-22-2018, 11:31 PM | #25 |
Join Date: Jun 2018
Posts: 56
|
any updates on this speedo and if it worked
Did the speedo install work!? my storm is coming in next week and I have the speedo and all my aftermarket parts already, I am not getting a new battery right now though. I will make sure to read through all the info here on installing and wiring because I am terrible at wiring;/ if only I could find a video!
|
|
|
|
|
|