04-24-2022, 04:14 PM | #1 |
Join Date: Apr 2022
Location: Alabama
Posts: 14
|
Tao hellcat jetting
I have a new hellcat, I bought the suggested 22mm Amazon carb and intake, removed the airbox, turned carb towards the front, Now I’m having a struggle getting my jetting right, Starts right up idles fine, just bogs and dies on take off, Havnt really got her to go enough to get a true reading on the plug. I’ve tried a 90,98, and a105. Main jet. None have worked so far, Any ideas would help. Thankyou
|
|
05-15-2022, 09:15 PM | #2 |
Join Date: Mar 2015
Location: Spokane, WA
Posts: 253
|
I have a VM22 carb on my Hellcat also.
I've been running these settings for the past year: main = #100 pilot = stock A/F screw = 1 turn out needle = top notch (lowest needle setting) with washer I still feel it's a little lean at idle/mid-range. I feel in addition to the #100 main (I drilled mine out)... I need to open my pilot just a hair too. Rode it for 20+ miles today... runs good. Cheers!
__________________
'20 TaoTao Hellcat 125 "grommet" '04 Yamaha TTR-125LE '00 Yamaha TTR-90 '07 Kinroad XT200GY Runmaster (sold) '07 KMD GY6 150cc ATV (sold) '07 Kangchao 250cc ATV Monster (sold) Baja Moto DB-30 "Doodlebugs"(x3) (sold) '06 Hi-Bird 200 parts bike (sold) |
|
|
|
|
|