Boom Vader 125 2020 model oil cooler

[daytonacat]

Question folks

I see some have installed an oil cooler on the grom clone.

Was wondering what to get and how to install it.

Thanks

Carl

[scoot newb]

The stock vader motor doesn't have any place to run lines for the oil cooler and doesn't require one. I wonder if the vaders you've seen have after market motors.

[ripcuda]

I was curious of the same thing. I don't see anywhere an oil cooler could be added to the stock TaoTao Hellcat 125 engine. Guess it's not needed.

[RedCrowRides]

I run an oil cooler on my Vader 125 , we ride the hell out of em here in FLA and its very hot and humid so for us it is a good idea .It's a very easy install altho you might have to fabricate some brackets for the oil cooler itself .


I'll try and remember to go take a pic of where the oil line adapter bolts on to the engineand post it later, but for now here are Ebay links to the install kit and oil cooler themselves :


oil cooler adapter /install kit :https://www.ebay.com/itm/Blue-Pit-Di...4AAOSwGEFd8sVk

[daytonacat]

here are a couple pics of the oil cooler on my 2020 Boom Vader Gen 2 bike
On mine motor I had to add about 1 1/2 ounces of additional oil to the engine due to the addition of the oil cooler.
I used a combination of the 2 following oil coolers.

1 used for the actual oil cooler. (black one)
1 used for the actual head side plate for the oil lines (blue oil cooler)
I could not find just the side plate for the head.
The one that the guy used and linked to should work as well.

Carl
https://www.ebay.com/itm/NEW-Oil-Coo...72.m2749.l2649

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[grumpyunk]

"cat... Nice install.
tom

[daytonacat]

thanks Grump