Spark Arrestor? - Page 2

Motoman · 06-04-2007, 12:28 AM

Found a good picture that I could read the model number. It says model 3.00 so I assume that it was the 3" universal model. I'm not sure that that makes much difference because I cut mine at the narrowest part of the neck down area to fit the collar on the exhaust pipe, and discarded the clamp section anyway. As I recall it wasn't a real tight fit, but it worked. I haven't had any problems and with the screws I don't have to worry about it vibrating loose and losing it on a trail.
I have forgotten how to add pictures to my gallery so I will keep working on it and try to get one posted.

Jim · 06-04-2007, 01:12 AM

Ok sounds good motoman, I will just have to measue my pipe... and then see if I can find a good deal, 80 bucks is still more then I want to spend

Motoman · 06-06-2007, 08:25 PM

This is a picture of the installation on my go kart, but I did the same thing to fit the "Sparkey" to my Jetmoto bike. They say a picture is worth a 1000 words. Hope this helps.

[/img]

Jim · 06-06-2007, 10:06 PM

Looks good, thanks

06-04-2007, 12:28 AM	#16
Motoman Join Date: Jul 2006 Location: Fresno, CA. Posts: 45	Found a good picture that I could read the model number. It says model 3.00 so I assume that it was the 3" universal model. I'm not sure that that makes much difference because I cut mine at the narrowest part of the neck down area to fit the collar on the exhaust pipe, and discarded the clamp section anyway. As I recall it wasn't a real tight fit, but it worked. I haven't had any problems and with the screws I don't have to worry about it vibrating loose and losing it on a trail. I have forgotten how to add pictures to my gallery so I will keep working on it and try to get one posted. __________________ 2006 Jetmoto TT200GY 2000 Suzuki VS800GL
	0

06-06-2007, 08:25 PM	#18
Motoman Join Date: Jul 2006 Location: Fresno, CA. Posts: 45	This is a picture of the installation on my go kart, but I did the same thing to fit the "Sparkey" to my Jetmoto bike. They say a picture is worth a 1000 words. Hope this helps. [/img] __________________ 2006 Jetmoto TT200GY 2000 Suzuki VS800GL
	0

06-04-2007, 01:12 AM	#17
Jim Join Date: Mar 2007 Location: Abbotsford, BC, Canada Posts: 4,880	Ok sounds good motoman, I will just have to measue my pipe... and then see if I can find a good deal, 80 bucks is still more then I want to spend
	0

06-06-2007, 10:06 PM	#19
Jim Join Date: Mar 2007 Location: Abbotsford, BC, Canada Posts: 4,880	Looks good, thanks
	0