03-21-2010, 10:04 PM | #1 |
Join Date: Jun 2009
Location: Onatrio Canada
Posts: 28
|
200cc Gio Beast Wire Question
so i took the body off the atv as i want to paint it. and got lookin at the wires and what not an seen a black on one side green on the side wire just hangin there with no place for it to go so its part of one of the wires that goes to the grip that starts the bike,does the lights and so on but i looked over all the wires and there is just no place for it could i be missin something or lost a wire or something ???? any help would be great 8O
|
|
03-21-2010, 11:18 PM | #2 |
Join Date: May 2009
Location: SASKATOON
Posts: 1,161
|
WIRING
Did you check the wiring diapgram that came in the back of the manual?? if you do not have one.. there is one posted somewhere on this site..
|
|
03-22-2010, 12:23 AM | #3 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I remember seeing that wire on TurboT's quad; it doesn't go anywhere. The truth is that left handgrip control was originally designed as a turn signal switch, and the start button was originally a horn button on some street bike. I'm not sure what that wire's original purpose was, but it's not needed on the Beast.
Cheers!
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
03-22-2010, 01:13 AM | #4 |
Join Date: Jun 2009
Location: Onatrio Canada
Posts: 28
|
i did look at the wire pic in the back of the book but i dont get it lmao...
and thanks for letin me no its just hangin there was doing my head in thinkin about what it could be for ... |
|
03-22-2010, 01:28 AM | #5 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
You're welcome.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
|