I HAVE NO SPARK

jhmotorsports · 02-05-2008, 06:29 PM

I have an off branded atv, 70,90 or 110cc automatic. It has no spark. I changed the CDI and ignition coil and no luck. I have checked the different safety switches and they all seem to be functional. Any ideas?? Let me know. Thanks.

mblas3 · 02-06-2008, 08:36 AM

Try disconecting the tether switch from the main circuit.

M

liverchip · 02-06-2008, 09:07 AM

Yep, check the cutout.

jhmotorsports · 02-06-2008, 06:56 PM

If I disconnect the tether and connect the two wires together, does that complete the circuit and allow spark? If it does, I did that and still have no spark. If that is wrong, please let me know.

mblas3 · 02-06-2008, 08:57 PM

Connecting them together will ground out the CDI(no spark). Just leave them unconnected. Also check the brake/clutch saftey swicthes.

jhmotorsports · 02-06-2008, 09:09 PM

I have done all of those things. I will do it all again tomorrow though. Any other suggestions? I appreciate all the feedback.

NewEnglandTrails · 02-13-2008, 05:52 PM

Check for Blown fuses....

jhmotorsports · 02-13-2008, 07:04 PM

Actually, I forgot to post the solution I found. The rear tether switch was bad. I appreciate all the comments and solutions!!

pedez2000 · 02-18-2008, 07:46 PM

stator

02-05-2008, 06:29 PM	#1
jhmotorsports Join Date: Oct 2007 Location: Saxonburg Posts: 35	I HAVE NO SPARK I have an off branded atv, 70,90 or 110cc automatic. It has no spark. I changed the CDI and ignition coil and no luck. I have checked the different safety switches and they all seem to be functional. Any ideas?? Let me know. Thanks.
	0

02-06-2008, 09:07 AM	#3
liverchip Join Date: Nov 2006 Location: Mystery Spot Posts: 1,223	Yep, check the cutout. __________________ 2009 XR650L Big Red Pig Tusk bar risers 2007 X-Moto(Jetmoto) GY250 --mods--- 15/40 sprockets UNI Pod Filter 2007 Shineray TMS 200XYi--Betsy Betsy Mods:______________________ Acerbis DHH headlight FMF Powercore pipe Uni Pod Filter
	0

02-13-2008, 05:52 PM	#7
NewEnglandTrails Join Date: Sep 2006 Location: The Quiet Corner of CT. Posts: 387	Check for Blown fuses.... __________________ 2006 HIBIRD QH200-st atv, 2005 Kinroad 200GY-01, 2006 Roketa DB-05, 1980 Kawasaki KZ440 LTD
	0

02-13-2008, 07:04 PM	#8
jhmotorsports Join Date: Oct 2007 Location: Saxonburg Posts: 35	All fixed!!!!!!!!!!!!!!! Actually, I forgot to post the solution I found. The rear tether switch was bad. I appreciate all the comments and solutions!!
	0

02-18-2008, 07:46 PM	#9
pedez2000 Join Date: Apr 2007 Location: tennesse Posts: 95	stator __________________ dirty south choppers LLC www.roketaparts.net powersports dealer parts and service www.sunlparts.net kelly stevenson and Gregg martinez sales@sunlparts.net
	0

02-06-2008, 08:36 AM	#2
mblas3 Join Date: Mar 2007 Posts: 120	Try disconecting the tether switch from the main circuit. M
	0

02-06-2008, 06:56 PM	#4
jhmotorsports Join Date: Oct 2007 Location: Saxonburg Posts: 35	If I disconnect the tether and connect the two wires together, does that complete the circuit and allow spark? If it does, I did that and still have no spark. If that is wrong, please let me know.
	0

02-06-2008, 08:57 PM	#5
mblas3 Join Date: Mar 2007 Posts: 120	Connecting them together will ground out the CDI(no spark). Just leave them unconnected. Also check the brake/clutch saftey swicthes.
	0

02-06-2008, 09:09 PM	#6
jhmotorsports Join Date: Oct 2007 Location: Saxonburg Posts: 35	I have done all of those things. I will do it all again tomorrow though. Any other suggestions? I appreciate all the feedback.
	0