![]() |
#1 |
Join Date: Jun 2014
Posts: 142
|
What jets are you running?
list what jets you are running!
Vehicle: 2007 SUNL atv Engine cc: 200cc Carb type: PZ30 mikuni clone Main jet: 110 Pilot jet: 25 im thinking of this combo for my atv. Highflow exhaust and intake. i just got my carb in the mail. anyone have suggestions on my jets? Last edited by SpudRider; 01-07-2015 at 09:03 PM. |
![]() |
![]() |
#2 |
Join Date: Jun 2014
Posts: 142
|
Nobody uses jets these days?
|
![]() |
![]() |
#3 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I missed your thread. I have a few 200cc Honda CG clones, and I'm running the following:
30mm Mikuni 30 slow jet 110 main jet Foam pod air filter Free-flowing muffler Sea level to about 1000 feet
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#4 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
My Zongshen ZS200GY-2 employs the same Teikei MV28 carburetor as the currently manufactured, Yamaha TW200 motorcycle. I have listed jet information in several threads in the ZS200GY-2 sticky, located at the top of the Dual Sport Forum.
![]() ![]()
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." ![]() 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
![]() |
![]() |
#5 |
Join Date: Jun 2014
Posts: 142
|
I was wanting to use a foam filter, but all my riding is offroad. Mud, water, and dust. I really like the may my factory air box is situated. i may just try to modify it.
|
![]() |
![]() |
#6 |
Join Date: Jun 2014
Posts: 142
|
what muffler are you using? any pics?
|
![]() |
![]() |
#7 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
The third pic with the pink anodized muffler is what I'm using: http://www.chinariders.net/showthread.php?t=6291
This thread shows the foam pod filter I'm using. Excellent filter. http://www.chinariders.net/showthread.php?t=9467
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#8 |
Join Date: Jun 2014
Posts: 142
|
are you using a genuine mikuni vm26 30mm or a PZ30 copy? i got my carb in today and noticed that it is a keihn PZ30 not a mikuni. not sure where to start on jetting
|
![]() |
![]() |
#9 |
Join Date: Jun 2014
Posts: 142
|
|
![]() |
![]() |
#10 |
Join Date: Jun 2014
Posts: 142
|
http://www.pjmotorsports.com/keihin-jets.html#main jets
i used that sight to find out that i have the following style of jets Keihin Round 99101-393 Main Jet Keihin N424-21 Pilot/Slow Jet but i dont know what sizes my factory ones are, or where i should start to upgrade. |
![]() |
![]() |
#11 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I don't like the Keihin PZ carbs as much, because jets can be hard to find. I don't have any other info on the carbs I've ordered, other than they say Mikuni on them, and the eBay description is 30mm.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#12 |
Join Date: Jun 2014
Posts: 142
|
alright thanks. ill see what i can find out! I might end up ditching this new carb and going with a genuine mikuni. they are not cheap though, the 30mm mikuni is like $90-115
|
![]() |
![]() |
#13 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
The Mikuni I've used several times has never been over $40 including shipping.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#14 |
Join Date: Jun 2014
Posts: 142
|
Could you post a picture of your carb? Any numbers on it?
|
![]() |
![]() |
#15 |
Join Date: Jun 2014
Posts: 142
|
i ended up just getting a Mikuni clone.
http://www.ebay.com/itm/181021019764...%3AMEBIDX%3AIT i dont want to deal with the headache of finding the correct jets for the PZ30. it is brand new never installed. i will post it in the for sale section. |
![]() |
|
![]() |
![]() |
|
|