250 rear shock!

King_7 · 05-22-2017, 02:03 PM

Hello everyone, after a little while i finally found out how to make my own post! so here it goes, i need a rear shock for one of 250cc vbike atv. Iv tried searching online for parts for this bike and no luck. Iv tried looking up if anyone had a similar issue and no luck. Well he is my question to everyone. Where could i find a part for this specific quad? has anyone ever replaced theirs? any upgrade/ performance shocks i could buy? does anyone know if the rear shock of a honda might work? I need a replacement. Im not sure exactly what model it is. I think its the v4 model, the one that looks similar to the honda trx. please and thank you for any help.

ripcuda · 05-22-2017, 04:22 PM

Remove your existing shock. Measure it's height... from center of top bolt to center of the bottom bolt. Also measure the width of the spring area. Also measure the size of the bolts (top and bottom). And lastly measure the width of the perch... area (top and bottom) where the bolt goes through.

With these measurements... you can start to track down shocks that will fit your application. Such as an example shock here off fleabay.
http://www.ebay.com/itm/10-5-Pit-Bik...RWePWP&vxp=mtr

Hope that helps. Cheers!

King_7 · 05-23-2017, 10:30 AM

hey thank you, ill give it a try. really appreciate it.

05-22-2017, 02:03 PM	#1
King_7 Join Date: May 2017 Posts: 3	250 rear shock! Hello everyone, after a little while i finally found out how to make my own post! so here it goes, i need a rear shock for one of 250cc vbike atv. Iv tried searching online for parts for this bike and no luck. Iv tried looking up if anyone had a similar issue and no luck. Well he is my question to everyone. Where could i find a part for this specific quad? has anyone ever replaced theirs? any upgrade/ performance shocks i could buy? does anyone know if the rear shock of a honda might work? I need a replacement. Im not sure exactly what model it is. I think its the v4 model, the one that looks similar to the honda trx. please and thank you for any help.
	0

05-22-2017, 04:22 PM	#2
ripcuda Join Date: Mar 2015 Location: Spokane, WA Posts: 253	Remove your existing shock. Measure it's height... from center of top bolt to center of the bottom bolt. Also measure the width of the spring area. Also measure the size of the bolts (top and bottom). And lastly measure the width of the perch... area (top and bottom) where the bolt goes through. With these measurements... you can start to track down shocks that will fit your application. Such as an example shock here off fleabay. http://www.ebay.com/itm/10-5-Pit-Bik...RWePWP&vxp=mtr Hope that helps. Cheers! __________________ '20 TaoTao Hellcat 125 "grommet" '04 Yamaha TTR-125LE '00 Yamaha TTR-90 '07 Kinroad XT200GY Runmaster (sold) '07 KMD GY6 150cc ATV (sold) '07 Kangchao 250cc ATV Monster (sold) Baja Moto DB-30 "Doodlebugs"(x3) (sold) '06 Hi-Bird 200 parts bike (sold)
	2

05-23-2017, 10:30 AM	#3
King_7 Join Date: May 2017 Posts: 3	hey thank you, ill give it a try. really appreciate it.
	0