sprockets again

[culcune]

Beerslayer, actually, the Zongshen that Deputygene has is the standard GY series bike. If you go to their site, they show the Sierra 200 (which is the unique one like what you have) and the Ranger 200 which is the common GY. Since Zongshen manufactures for several different brands such as Tank, Roketa, etc., these are the common GY's that interchange with some Honda parts, and then they manufacture the Yamaha-based GY (don't know what constitutes the GY name, but they probably should have used a different code-name) such as their own Sierra 200, the Qlink X-Ranger, and the Vento Mountrack (although Vento doesn't feature this bike anymore). Deputy's bike should interchange with the Lifan-based and Zongshen-based GY's.

[deputygene]

Beerslayer, you want to set up a trade and see if they will work? I leave in the am till sun night, but we can try a swap then.

[deputygene]

Also, still looking for cheap, I used the search phrase motorcycle sprocket and came up with this one on ebay
http://cgi.ebay.com/ebaymotors/WHOLE...spagenameZWDVW
If anyone can cross reference any of the part numbers this would be a deal. 10 sprockets, heck if you could only use two of them you would be ahead. If anyone figures out that a couple of these will fit, I'm in for a 46 or 44 tooth one.
Vlad, I saw your post too, I'm sure they make a great sprocket, I just don't want to spend 50 bucks on a sprocket.

[zacstewart]

Originally Posted by mdsuave13

i got an owners manual with my bike. Its a blast to read, mainly because of all the chinese to english translations.

I dont have a scanner, but maybe i can find someone that does, and just put it up on the net as an adobe reader?? i am pretty lazy tho, maybe if someone else has the ability to do this, i can mail it to them, they can make the adobe file and then send it back?

ENGRISH! :0 http://www.roketa.com/htm/manuals/index.htm

[fatboy250]

Originally Posted by culcune

these are the common GY's that interchange with some Honda parts, and then they manufacture the Yamaha-based GY

If you know of any parts specifically it would be helpful to share it in the Cross Reference Parts thread.

Jason

[deputygene]

Beerslayer, wanna trade sprockets and see if they will work. Mine is a 50 tooth 4 bolt hole sprocket. I can measure the distance, center-to-center of the bolts if you need me to.

[bfe71730]

Hey deputygene, here's one for cheap http://cgi.ebay.com/ebaymotors/HONDA...QQcmdZViewItem

and another....
http://cgi.ebay.com/ebaymotors/Honda...QQcmdZViewItem

[culcune]

that second one is a buy for sure! Heck, the first one, too!

[fatboy250]

So can we conclude that the rear sprocket is cross referenced to these bikes list in the second ebay auction????

ST90 73-77, CB100 70-72, CL100 70-72, CB100S 71-73, XL100 74-76, SL100 75-78, CB125 S 73-82, CL125 73-74, MT125 74-76, SL125 71-73

From the first: CB200

If so, I can add this to the list of parts

[culcune]

To be honest, I don't remember the CB200 being a reference, but those others are. I know that bfe71730 had referenced them before, maybe on the ChinaBikes Forum?

[fatboy250]

Originally Posted by culcune

To be honest, I don't remember the CB200 being a reference, but those others are. I know that bfe71730 had referenced them before, maybe on the ChinaBikes Forum?

From the first ebay aution listed.

[bfe71730]

I'd be willing to bet the cb200 sprocket will work, I believe it was cross-referenced with the other models listed when I bought my sprocket. It could be a 520 chain size is the only thing.

[fatboy250]

ok that's good. I can list it under the 520 cross reference

[bfe71730]

About the second listing I mentioned, the seller(ibuy.isell) has listed hundreds of sprockets on ebay, if anyone is looking for a specific size they could contact him for their application. He sell these cheap, most I've seen are less than $10 and they are brand new.

[culcune]

Originally Posted by fatboy250

From the first ebay aution listed.

I am suspiciously auspiciously confused... :roll: :roll:

The CB200 has never been cross-referenced as a (428 chain) replacement, but like bfe said, the other ones are. He had linked me to that ebayer several months ago, I think after I ordered a 44 tooth from Dennis Kirk. That Ebay dealer has been around for a while and sells the sprockets very low cost. Perhaps we should keep him a chinariders secret. I would be very interested to see how the 40 tooth rear works.