Hello ChinaRiders!

Pawnrider · 11-11-2010, 12:18 AM

I wanted to say Hi, and thank you to everyone here at ChinaRiders. I bought

my 2006 Qlink X-Ranger 200 in the summer of 2009 with the help of this

site. It came with the dual purpose tires not mounted with inner tubes, and

only had 61 miles on the odo. The bike was in brand new condition, and it

turns out it was originally purchased from a dealer new in 2007 in the same

town I live in for $1,850. The original owner never had it titled or registered

and then decided to part ways with it at a pawnshop a few miles from where

I live. So I paid $1,200 and took it home. Not a bad price considering I

didn't have to pay for shipping, and what came with it. I live in Northwest

Arkansas, and there are a few good places to ride trails not far from

where I live. I now have 1007 miles on the bike and have decided to

take it apart for several mods I am going to do. I am an over the road

truck driver so I am only on the internet infrequently while I am working.

After doing some of the mods I've seen on this site to this bike, I can

honestly say that it only gets much better and much more fun! Thanks

again, and good riding to all!

Weldangrind · 11-11-2010, 03:25 AM

I believe that's the Q version of the Zongshen Sierra. I want one bad. Good score.

Welcome! Spudrider is the master of Zong mods.

FastDoc · 11-11-2010, 11:16 AM

Dual sport rear tires in 15" are rarer than hen's teeth.

Welcome to the forum!

SpudRider · 11-11-2010, 10:37 PM

Welcome to these forums, Pawnrider. Also, welcome to the Cult of The Zong!

You have been assimilated, and we are very pleased to have you join the Zong Collective.

If you have time, please do post photos of your X-Ranger! We love photos, and we would love to see your modifications.

P.S. If fellow Zongites wish to buy his Chinese, dual sport tires, Pawnrider is offering them for sale in our For Sale Forum.

Spud

Pawnrider · 11-14-2010, 03:29 AM

Thank you, Weldangrind, FastDoc, and SpudRider! Nice to meet you

gentlemen on these forums! This is actually the first forum online that I

have been a participant on it's really pretty fun, but I'm still learning how

to use computers so I apologize for being a bit slow. So far I have the 13t

countershaft sprocket (not installed), stainless exhaust header with fmf

turbinecore2 silencer, polisport front fender, drc edge2 tailight with led

turn signals and electronic flasher. Right now the Zong is stripped down

with the gas tank removed as I am getting ready to do more mods to it

over the winter season, and unfortunately I don't have any pics of it b4

beginning to take it apart. Hopefully gathering parts will go well in time for

next riding season.

Weldangrind · 11-14-2010, 03:36 AM

Please warm up your trigger finger; we love photos!

SpudRider · 11-14-2010, 03:51 AM

You got a lot of nice goodies for your Zong, Pawnrider! When you have time, please do post some photos.

Spud

Pawnrider · 11-14-2010, 05:00 AM

10-4, will do, I am hoping to get the wheels, swingarm, and gas tank done

over the winter. Hopefully it won't take too long!

11-11-2010, 12:18 AM	#1
Pawnrider Join Date: Apr 2010 Posts: 15	Hello ChinaRiders! I wanted to say Hi, and thank you to everyone here at ChinaRiders. I bought my 2006 Qlink X-Ranger 200 in the summer of 2009 with the help of this site. It came with the dual purpose tires not mounted with inner tubes, and only had 61 miles on the odo. The bike was in brand new condition, and it turns out it was originally purchased from a dealer new in 2007 in the same town I live in for $1,850. The original owner never had it titled or registered and then decided to part ways with it at a pawnshop a few miles from where I live. So I paid $1,200 and took it home. Not a bad price considering I didn't have to pay for shipping, and what came with it. I live in Northwest Arkansas, and there are a few good places to ride trails not far from where I live. I now have 1007 miles on the bike and have decided to take it apart for several mods I am going to do. I am an over the road truck driver so I am only on the internet infrequently while I am working. After doing some of the mods I've seen on this site to this bike, I can honestly say that it only gets much better and much more fun! Thanks again, and good riding to all!
	0

11-11-2010, 03:25 AM	#2
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I believe that's the Q version of the Zongshen Sierra. I want one bad. Good score. Welcome! Spudrider is the master of Zong mods. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

11-11-2010, 11:16 AM	#3
FastDoc Join Date: Mar 2009 Location: Southeastern Washington desert Posts: 14,761	Dual sport rear tires in 15" are rarer than hen's teeth. Welcome to the forum! __________________ Happy to serve.
	0

11-11-2010, 10:37 PM	#4
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Welcome to these forums, Pawnrider. Also, welcome to the Cult of The Zong! You have been assimilated, and we are very pleased to have you join the Zong Collective. If you have time, please do post photos of your X-Ranger! We love photos, and we would love to see your modifications. P.S. If fellow Zongites wish to buy his Chinese, dual sport tires, Pawnrider is offering them for sale in our For Sale Forum. Spud __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

11-14-2010, 03:36 AM	#6
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Please warm up your trigger finger; we love photos! __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

11-14-2010, 03:29 AM	#5
Pawnrider Join Date: Apr 2010 Posts: 15	Thank you, Weldangrind, FastDoc, and SpudRider! Nice to meet you gentlemen on these forums! This is actually the first forum online that I have been a participant on it's really pretty fun, but I'm still learning how to use computers so I apologize for being a bit slow. So far I have the 13t countershaft sprocket (not installed), stainless exhaust header with fmf turbinecore2 silencer, polisport front fender, drc edge2 tailight with led turn signals and electronic flasher. Right now the Zong is stripped down with the gas tank removed as I am getting ready to do more mods to it over the winter season, and unfortunately I don't have any pics of it b4 beginning to take it apart. Hopefully gathering parts will go well in time for next riding season.
	0

11-14-2010, 03:51 AM	#7
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	You got a lot of nice goodies for your Zong, Pawnrider! When you have time, please do post some photos. Spud __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

11-14-2010, 05:00 AM	#8
Pawnrider Join Date: Apr 2010 Posts: 15	10-4, will do, I am hoping to get the wheels, swingarm, and gas tank done over the winter. Hopefully it won't take too long!
	0