![]() |
#1 |
Join Date: Jun 2010
Location: UK
Posts: 37
|
Hello from the UK
Just bought a brand new LF200 GY-2, unregistered & with 0 miles for the princely sum of £425!
Found the site by accident & its great - hope the bike is too! ![]() |
![]() |
![]() |
#2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Welcome!
Congrats on the good score. I believe this is the first bike over 150cc on this forum from the UK. I was beginning to think that nobody imported 200cc bikes.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#3 |
Join Date: Jun 2010
Location: UK
Posts: 37
|
There are quite a few GY200 clones in the UK - branded Lifan, Zongshen, Kinroad, BTS, Sukida.... I could go on and on!
Well impressed with my GY so far, its branded 'Xplorer' but in the VIN no begins LF indicating Lifan I think? Its not a 2010 model - guess c2006 ish but brand new for that money was too good a deal to miss! After I've run it in (1000kms) 612kms to date on the clock, will do another oil change and fit the larger jet to the carb & power filter I have already. Anything else I would need to do - either general maintenance wise or to boost the power - don't do off roading so top end speed is more use to me - any advice greatfully received. Oh, forgot to say its the 163FML engine - is this OHC or OHV? How do I tell? |
![]() |
![]() |
#4 |
Join Date: Mar 2007
Location: Abbotsford, BC, Canada
Posts: 4,880
|
Welcome.
__________________
"Be excellent to each other" "We are all human. Let's start to prove it!" |
![]() |
![]() |
#5 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Welcome. Looks just like mine. Mine was a 2006 model.
Allen
__________________
You meet the nicest people on a Honda Clone. |
![]() |
![]() |
#6 |
Join Date: Sep 2008
Location: Surrey, B.C., Canada
Posts: 2,185
|
Welcome, mate!
![]() |
![]() |
![]() |
#7 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Welcome to these forums, and thank you for posting a photo of your new bike!
![]() Spud ![]()
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." ![]() 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
![]() |
![]() |
#8 | |
Join Date: Oct 2009
Posts: 826
|
Quote:
http://204.68.195.151/cars/rules/manufacture/ OHV ![]() OHC ![]() I am sure that the engine has some things to check at 1000km, but there is no service manual on that engine, that I have seen. |
|
![]() |
![]() |
#9 |
Join Date: Jun 2010
Location: UK
Posts: 37
|
Looks like the OHV picture.
First 3 characters of the VIN are LF3 but nothin seems to come up via that link - any ideas? |
![]() |
![]() |
#10 |
Join Date: Oct 2009
Posts: 826
|
did you enter into the field for WMI? "LF3" without the quotations.
It worked for me....its made by Lifan. ftp://ftp.nhtsa.dot.gov/mfrmail/ORG6185.pdf Your VIN would be LF3YCM60... It's a nice bike and brand new for $617, you cannot beat that. Whys soo low? whats the story on it, it has a disk in back and inverted forks its nice... |
![]() |
![]() |
#11 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
That's £425, not $425. That's $965 Canadian or $820 US. Still a good deal.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#12 |
Join Date: Jun 2010
Location: UK
Posts: 37
|
A long story but briefly....
It belonged to a shop who went bankrupt & was taken by the official receiver who duly auctioned off all the stock. A guy bought it but couldn't get it registered for road use in the UK as there was documentation missing. Subsequently, I took it off his hands & wrangled with HM Customs & DVLA (thats the licencing dept) for about month before finally succeeding in obtaining a registration. Got there eventually....... |
![]() |
![]() |
#13 |
Join Date: Jun 2010
Location: UK
Posts: 37
|
Got the VIN thing sorted.
It begins LF3YCM2085D...... a 2005 manufactured Lifan unit I think? |
![]() |
![]() |
#14 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,035
|
Welcome to here! There seem to be quite a fair number of Chinese bikes in the UK.
|
![]() |
![]() |
#15 | |
Join Date: Oct 2009
Posts: 826
|
Quote:
1 GBP = 1.45507 USD 1 GBP = 1.50246 CAD |
|
![]() |
|
![]() |
![]() |
|
|