![]() |
#1 |
Join Date: Jul 2007
Posts: 56
|
has anyone seen a pilot jet like this?
anyone seen a pilot jet like this? its from a sheng wey pd3 carb, i have yet to test out the carb itself but the other two (stock one and a "mikuni") needed a richer pilot jet, but because i like this carb the best i wanted to find the parts for this one to make this one work
![]() |
![]() |
![]() |
#2 |
Join Date: Mar 2007
Posts: 120
|
My original carburetor had that same jet. I was not able to find a larger one so I replaced the carburetor. Good luck finding one.
M |
![]() |
![]() |
#3 |
Should be a normal Keihin pilot jet. I get mine at Chaparral as they're relatively close to me.
__________________
2009 XR650L Big Red Pig Tusk bar risers 2007 X-Moto(Jetmoto) GY250 --mods--- 15/40 sprockets UNI Pod Filter 2007 Shineray TMS 200XYi--Betsy ![]() Betsy Mods:______________________ Acerbis DHH headlight FMF Powercore pipe Uni Pod Filter |
|
![]() |
![]() |
#4 |
__________________
2009 XR650L Big Red Pig Tusk bar risers 2007 X-Moto(Jetmoto) GY250 --mods--- 15/40 sprockets UNI Pod Filter 2007 Shineray TMS 200XYi--Betsy ![]() Betsy Mods:______________________ Acerbis DHH headlight FMF Powercore pipe Uni Pod Filter |
|
![]() |
![]() |
#5 |
Join Date: Jul 2007
Posts: 56
|
none of the jets match mine tho which was the issue
|
![]() |
![]() |
#6 |
Join Date: Mar 2009
Posts: 63
|
For all a new Mikuni costs, it's worth it to just replace the carb. I replaced my Sheng Wey (Keihin clone) with a 24mm Mikuni and there is no comparison. The Mikuni just seems to work better all the way through the rev range than the "Keihin" ever did. I think I paid about 25 bucks for it on Ebay.
food for thought... Phil |
![]() |
![]() |
#7 |
Join Date: Jul 2007
Posts: 56
|
funny, i just put in a shengwey and its the first (of three) carbs to finally let the bike run, i may try and get a mikuni or keihnin but right now the shengwey works fine for me
|
![]() |
![]() |
#8 | |
Quote:
__________________
2009 XR650L Big Red Pig Tusk bar risers 2007 X-Moto(Jetmoto) GY250 --mods--- 15/40 sprockets UNI Pod Filter 2007 Shineray TMS 200XYi--Betsy ![]() Betsy Mods:______________________ Acerbis DHH headlight FMF Powercore pipe Uni Pod Filter |
||
![]() |
![]() |
#9 | ||
Join Date: Mar 2009
Posts: 63
|
Quote:
|
||
![]() |
![]() |
#10 |
Join Date: Mar 2007
Posts: 120
|
Everything from Hong Kong is "genuine" :wink:, but that is a knockoff carburetor. I have two of them. One has a 38 pilot jet and the other has a 40. What size are you looking for?
Also from trying to tune the carburetor before I found one with a actual Mikuni style pilot jet I found the main jets where not accurate in there marked sizes. M |
![]() |
![]() |
#11 |
Join Date: Jul 2007
Posts: 56
|
i was actually looking to find the jets before i even tried the carb, when i tried it, it runs perfectly! it is even on the rich side anyways so im alset, but thanks guys
|
![]() |
![]() |
#12 |
I cannot seem to locate any documentation on the Mikuni website for these "genuine" Mikuni carbs. Perhaps they're just Mikuni "style"?
![]()
__________________
2009 XR650L Big Red Pig Tusk bar risers 2007 X-Moto(Jetmoto) GY250 --mods--- 15/40 sprockets UNI Pod Filter 2007 Shineray TMS 200XYi--Betsy ![]() Betsy Mods:______________________ Acerbis DHH headlight FMF Powercore pipe Uni Pod Filter |
|
![]() |
![]() |
#13 |
Join Date: Jul 2007
Posts: 56
|
thats what i figure lol
|
![]() |
|
![]() |
![]() |
|
|