Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 09-10-2008, 04:53 AM   #106
tigertamer   tigertamer is offline
 
Join Date: Jul 2008
Location: Wheeling, West Virginia
Posts: 683
Quote:
Originally Posted by IronFist
My first shot at hallogen didn't go well. That 35w/35w is looking good to me. I hot wired a halogen in but I don't know the pin out for the High low and negitive terminals on the bulb. I had to try all combinations of wires to the 3 terminals on the bulb. The electrical draw was unacceptable. I need a lower wattage bulb like the 35/35.

Anyone try HID lighting? I have no experience with lighting.

I can't afford HID, but I did stay at Holiday Inn Express, last night :idea:

Try this little treatice...It's short, so you can forego the popcorn :wink:


http://mgaguru.com/mgtech/electric/et107a.htm


Tigertamer
__________________
07 H-D XL883C
06 LF 200GY-5
Yin and Yang

CAUTION
Obey The Traffic Regulation.
Always Wear a Helmet.
Don't Ride After Drinking Wine.
Before Operation, Read The Owners Manual Carefully.


 
Reply With Quote
Old 09-29-2008, 09:07 AM   #107
Switchtr3   Switchtr3 is offline
 
Join Date: Sep 2008
Location: Connecticut
Posts: 3
just saved everyone here a lot of grief, one thing i've learned parts are hard to find for these bikes THANK YOU


 
Reply With Quote
Old 10-20-2008, 04:46 PM   #108
liverchip   liverchip is offline
 
Join Date: Nov 2006
Location: Mystery Spot
Posts: 1,223
Send a message via MSN to liverchip
New parts dealer find.

Found this link foating around on another site. Checked it out and found a 302 cc motor. At 1300$ it's a bit steep, but it's a start. Seems to have a pretty good selection of parts as well.

http://saturdaynightcycles.net/
__________________
2009 XR650L Big Red Pig
Tusk bar risers

2007 X-Moto(Jetmoto) GY250
--mods---
15/40 sprockets
UNI Pod Filter

2007 Shineray TMS 200XYi--Betsy
Betsy Mods:______________________
Acerbis DHH headlight
FMF Powercore pipe
Uni Pod Filter


 
Reply With Quote
Old 10-21-2008, 08:02 AM   #109
katoranger   katoranger is offline
 
katoranger's Avatar
 
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
Some of the pricing is not bad, but alot of it is expensive. First reall site for performance parts that I have seen.

Allen
__________________
You meet the nicest people on a Honda Clone.


 
Reply With Quote
Old 10-21-2008, 03:09 PM   #110
Kawazacky   Kawazacky is offline
 
Join Date: Mar 2008
Location: Saint John, N.B.
Posts: 279
This stuff looks like the same components that Bataycan had for sale. I'd like to believe in a 36hp 302cc motor, but......we will see.


 
Reply With Quote
Old 10-21-2008, 11:15 PM   #111
smegmike   smegmike is offline
 
Join Date: Sep 2008
Posts: 11
Does anyone know where I can get parts for the GY200 .... specifically exhaust parts for the GY200 in Canada or a Company in the U.S. that will ship to Canada?


 
Reply With Quote
Old 10-22-2008, 04:59 AM   #112
DDG1976   DDG1976 is offline
 
Join Date: Aug 2008
Location: Ringgold, Ga.
Posts: 410
Send a message via Yahoo to DDG1976
Quote:
Originally Posted by smegmike
Does anyone know where I can get parts for the GY200 .... specifically exhaust parts for the GY200 in Canada or a Company in the U.S. that will ship to Canada?
Try these,............

http://www.hooperimports.com/product..._id=LF200Exhst

http://www.lifan-motorcycles-wholesa...200-parts.html

http://www.rabbitscooters.com/products/parts.htm
__________________
I have all of soberday to satur up!!


 
Reply With Quote
Old 10-22-2008, 04:50 PM   #113
dlloyduk   dlloyduk is offline
 
Join Date: Oct 2008
Posts: 1
Re: New parts dealer find.

Quote:
Originally Posted by liverchip
Found this link foating around on another site. Checked it out and found a 302 cc motor. At 1300$ it's a bit steep, but it's a start. Seems to have a pretty good selection of parts as well.

http://saturdaynightcycles.net/
Makes me wonder why the video of the GY-200 exhaust is shown fitted to a Ducati Monster??


 
Reply With Quote
Old 10-25-2008, 05:16 PM   #114
china_parts_canada   china_parts_canada is offline
 
Join Date: Oct 2008
Location: Vernon, BC, Canada
Posts: 30
Send a message via MSN to china_parts_canada
Quote:
Originally Posted by smegmike
Does anyone know where I can get parts for the GY200 .... specifically exhaust parts for the GY200 in Canada or a Company in the U.S. that will ship to Canada?
Hi,

I am in Canada and likely have your exhaust in stock. send me a picture of your exhaust just to make sure and I will get back to you. If I don't have it I can get it.

parts@chinapartscanada.com

Cheers,

Art


 
Reply With Quote
Old 10-25-2008, 08:24 PM   #115
DDG1976   DDG1976 is offline
 
Join Date: Aug 2008
Location: Ringgold, Ga.
Posts: 410
Send a message via Yahoo to DDG1976
cool a parts guy, you'll be flooded with PM's probably. I need a right side brake lever any help?
__________________
I have all of soberday to satur up!!


 
Reply With Quote
Old 10-25-2008, 10:17 PM   #116
china_parts_canada   china_parts_canada is offline
 
Join Date: Oct 2008
Location: Vernon, BC, Canada
Posts: 30
Send a message via MSN to china_parts_canada
Yup I peobably have it

Quote:
Originally Posted by DDG1976
cool a parts guy, you'll be flooded with PM's probably. I need a right side brake lever any help?
I am almost positive I will have it in stock but I need a measurement of its length and a picture would really help.

You can e-mail the pic to parts@chinapartscanada.com

By the way I only accept PayPal at this time. The good part about that is you can see my ebay feedback to see what kind of seller I am. I do serve my customers well.

Cheers,

Art


 
Reply With Quote
Old 10-29-2008, 07:30 PM   #117
gomoto   gomoto is offline
 
Join Date: Sep 2008
Posts: 16
gy-5 rear break pads

Hey guys if you have a gy-5 with rear disk breaks the replacments pads are for a

07 YZF 450. They are a perfect match

Thanks and God Bless....


 
Reply With Quote
Old 10-30-2008, 10:11 AM   #118
fatboy250   fatboy250 is offline
 
Join Date: Sep 2006
Location: COLUMBIA, SC
Posts: 973
Re: gy-5 rear break pads

Quote:
Originally Posted by gomoto
Hey guys if you have a gy-5 with rear disk breaks the replacments pads are for a

07 YZF 450. They are a perfect match

Thanks and God Bless....
Thanks! It's been added

Jason
__________________
2008 Jonway MC-70-150
2007 Roketa DB-07B (RSM-200E)
2006 Roketa DB-07A (RSX-200E)
1995 Kawasaki Concours (ZG1000)


 
Reply With Quote
Old 11-05-2008, 02:45 PM   #119
DDG1976   DDG1976 is offline
 
Join Date: Aug 2008
Location: Ringgold, Ga.
Posts: 410
Send a message via Yahoo to DDG1976
Hi, everbody anyone looking for a sprocket for a gy-5 here's a great link. They have a large selction.

http://www.powersportsuperstore.com/...?Search=jtr269
__________________
I have all of soberday to satur up!!


 
Reply With Quote
Old 11-09-2008, 04:46 AM   #120
JWarren   JWarren is offline
 
Join Date: Nov 2008
Location: Port Saint Lucie Florida
Posts: 18
I recently put a new battery in the LF200. I don't know if this one is in your list, I didn't see it anyways.

Got it at Wal-Mart for $22 after the core of $9.00.

EverStart 12V power sport battery, part # ES12N94B1

Fits nice and snug and works like a charm!

re-edit====

I have put this in the thread I do not know if this battery will work in the dual sport bike.

OOOOPPPPPSSS!
__________________
John


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:16 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.