Zongshen - Page 5

bex · 07-01-2008, 09:07 AM

Quote:

Originally Posted by allmotor

so bex anyword of if your buddy has any mods on his bike?

Nah, he has no mods at all on his bike. But he is back in town and going to remove my stock air box to put in a UNI pod filter. I will take pics and document the removal/install.

Hoping since I am at sea level I wont need to rejet or move the C-Clip up in the carb, just a plug and play move.

I have purchased a used FMF Q2 exhaust and will most def need a jet kit for my carb when that goes on. Will keep you posted.

allmotor · 07-01-2008, 10:23 AM

o yea that sounds cool.. Let me know how that FMF sounds..

allmotor · 07-01-2008, 10:25 AM

Quote:

Originally Posted by max_damage

Quote:

Originally Posted by allmotor

Quote:

Originally Posted by max_damage

I own a Zongshen 200gy-2 (supermoto).
So far 10 000km, not a single problem

Here are the pics
http://www.chinariders.net/gallery2/...g2_itemId=7791

WOW thats what i wanted to hear!! someone that has a Sierra... what kind of speeds have you've seen with this bad boy?

max 120 km/h

Is that at a constant speed or just peaking out?? And any kind of mods?

bex · 07-01-2008, 10:46 PM

allmotor:

The bike comes stock with a 46T/428 rear sprocket.

Sadly, we had to abort the air filter mod to the UNI pod filter because the air box provides structural support for some internal parts i.e. rear inner fender and the battery box.

It could be done, but you would have to cut the stock box to make it happen. Decided against that for the time being!

allmotor · 07-01-2008, 11:39 PM

no prob thanks for the info... When i get my bike...sigh...i will hop it all up... my girls B-day is the 10 of july so i'll have to wait since i'm paying off half of her car... sad times... but the week after i'll be hopefully picking up my bike.

katoranger · 07-02-2008, 07:51 AM

You could remove the airbox and make supports from some home depot pipe hangers.

Allen

bex · 07-02-2008, 10:03 AM

Here is a breakdown pic from the Zongshen site showing the airbox and how its built.

http://parts.zongsheninternational.c...560&height=420

We had an option to hack the stock airbox up, but I didn't want to risk it since there could have been a running issue if the carb need to be tuned or up jetted. Perhaps a bit later i'll have the minerals to get it done. :^/

allmotor · 07-02-2008, 10:07 AM

intresting...

allmotor · 07-07-2008, 11:51 AM

any updates?

bex · 07-07-2008, 06:26 PM

Decided totally against the mod of the airbox. Right now its a bad week for the Zong. I must have had a mental jam, didnt lock the kick stand down all the way and the bike fell off the stand and bent the handlebar.

Ordering my replacement parts from the Miami Importer tomorrow. Total parts bill is $58.00.

iMoose · 07-08-2008, 04:31 AM

Quote:

Originally Posted by bex

Ordering my replacement parts from the Miami Importer tomorrow. Total parts bill is $58.00.

I'm in Florida, what's the dealer's name? Website? I dig ze Zongshens! But no dealer close has anything but the street bikes. Help?

allmotor · 07-08-2008, 10:29 AM

Quote:

Originally Posted by bex

Decided totally against the mod of the airbox. Right now its a bad week for the Zong. I must have had a mental jam, didnt lock the kick stand down all the way and the bike fell off the stand and bent the handlebar.

Ordering my replacement parts from the Miami Importer tomorrow. Total parts bill is $58.00.

now that sucks... you should be back up and riding soon.

bex · 07-08-2008, 10:32 PM

Allmotor:

Yeah it totally bites being sidelined for a freaking accident of the mind, but hey it happens. I am in possession of my FMF Q2 so I will take the down time to size her up and then once back on the street get the new exhaust welded on.

iMoose:

The importer for the zongshen brand is in miami, www.zongshenamerica.com telephone them at (305) 500-9989 ask for Manny, he does parts at the warehouse.

iMoose · 07-09-2008, 05:35 AM

Quote:

Originally Posted by bex

Allmotor:
The importer for the zongshen brand is in miami, www.zongshenamerica.com telephone them at (305) 500-9989 ask for Manny, he does parts at the warehouse.

Thank you!!!!!

allmotor · 07-16-2008, 03:20 PM

any updates?

07-02-2008, 07:51 AM	#66
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	You could remove the airbox and make supports from some home depot pipe hangers. Allen __________________ You meet the nicest people on a Honda Clone.
	0

07-01-2008, 10:23 AM	#62
allmotor Join Date: Jun 2008 Posts: 68	o yea that sounds cool.. Let me know how that FMF sounds..
	0

07-01-2008, 10:46 PM	#64
bex Join Date: Apr 2008 Posts: 55	allmotor: The bike comes stock with a 46T/428 rear sprocket. Sadly, we had to abort the air filter mod to the UNI pod filter because the air box provides structural support for some internal parts i.e. rear inner fender and the battery box. It could be done, but you would have to cut the stock box to make it happen. Decided against that for the time being!
	0

07-01-2008, 11:39 PM	#65
allmotor Join Date: Jun 2008 Posts: 68	no prob thanks for the info... When i get my bike...sigh...i will hop it all up... my girls B-day is the 10 of july so i'll have to wait since i'm paying off half of her car... sad times... but the week after i'll be hopefully picking up my bike.
	0

07-02-2008, 10:03 AM	#67
bex Join Date: Apr 2008 Posts: 55	Here is a breakdown pic from the Zongshen site showing the airbox and how its built. http://parts.zongsheninternational.c...560&height=420 We had an option to hack the stock airbox up, but I didn't want to risk it since there could have been a running issue if the carb need to be tuned or up jetted. Perhaps a bit later i'll have the minerals to get it done. :^/
	0

07-02-2008, 10:07 AM	#68
allmotor Join Date: Jun 2008 Posts: 68	intresting...
	0

07-07-2008, 11:51 AM	#69
allmotor Join Date: Jun 2008 Posts: 68	any updates?
	0

07-07-2008, 06:26 PM	#70
bex Join Date: Apr 2008 Posts: 55	Decided totally against the mod of the airbox. Right now its a bad week for the Zong. I must have had a mental jam, didnt lock the kick stand down all the way and the bike fell off the stand and bent the handlebar. Ordering my replacement parts from the Miami Importer tomorrow. Total parts bill is $58.00.
	0

07-08-2008, 10:32 PM	#73
bex Join Date: Apr 2008 Posts: 55	Allmotor: Yeah it totally bites being sidelined for a freaking accident of the mind, but hey it happens. I am in possession of my FMF Q2 so I will take the down time to size her up and then once back on the street get the new exhaust welded on. iMoose: The importer for the zongshen brand is in miami, www.zongshenamerica.com telephone them at (305) 500-9989 ask for Manny, he does parts at the warehouse.
	0

07-16-2008, 03:20 PM	#75
allmotor Join Date: Jun 2008 Posts: 68	any updates?
	0