where?

ant · 02-19-2007, 09:02 PM

where can i get good parts to fix my lifan gy-5 back up??

bfe71730 · 02-19-2007, 09:14 PM

ohh, CHIT, looks like you need a whole new bike, are you OK? what parts do you need?

ambassador · 02-19-2007, 09:14 PM

Ouch, how did you manage that?

There are a couple of guys on this site that have parts for these bikes, I'm sure if you talked to them they could help you out, just read the forums, it may help you out with other things regarding your bike as well..

Ferrit · 02-19-2007, 09:15 PM

I'm hoping you forgot to tie down the bike in the back of your truck and it fell out!!

Hope you're OK Ant.

ant · 02-19-2007, 09:23 PM

no i was on the bike and hit some ditch thing i didnt see and i rolled an whole bunch of times i didnt really get hurt because i wore my helment

ant · 02-19-2007, 09:27 PM

ant · 02-19-2007, 09:29 PM

i need everything up front i will get a better pic tomorrow

ambassador · 02-19-2007, 09:45 PM

Glad to hear your OK, Helmets save lives, you got some work, I'm sure it looks worse than it is, new rim, fender.. Did your forks bend??? The guys here will take care of you and your bike...I'm sure they have or can lead you in the right direction for parts...

ant · 02-19-2007, 09:48 PM

no the forks are straight i need a hood,headlight,guages,ignition.brake lever,clutch cable,speedo cable and some other stuff. was going about 40 mph

ambassador · 02-19-2007, 09:55 PM

Man, That sux... Welcome to the site... There's alot of cool people here that all have China bikes and don't give anyone any crap for owning one.. May I suggest ejcycles or RPM, they are both members here and have their own shops and carry some parts for these bikes, I'm sure they can point you in the right direction for all that you need...

ambassador · 02-19-2007, 10:04 PM

Were you drinking wine????

dlunt · 02-19-2007, 10:19 PM

Well if you don't keep an eye on the spoke tension, the front wheel will end up looking like that anyway. :twisted:

Glad you are okay man!

My son hit one of those "things" on his second ride out. Right over the handlebars. No bike damage and the helmet also did it's job too.

Roketarider · 02-20-2007, 06:31 AM

Contact the guys on here with shops, they should get you squared away, butmaybe you could piece together some other item from other bike and fabricate it on your bike, like a headlamp?

red2003 · 02-20-2007, 07:26 AM

Are you sure those front forks aren't tweeked? It sure looks it in the pic. If you're going to need new forks, front wheel (definately) and all that other stuff, it might be just as cheep to buy a new bike. Seriously. I can guarantee that if your rolled it, the rear frame is tweeked also, and probably lots of other stuff you haven't dug into yet. You're looking at $500.00+ in parts alone. Sorry for your spill, but very glad to hear you walked away.

culcune · 02-20-2007, 09:53 AM

Glad to read that you are ok. You now have the potential to become the poster child for the low price of these bikes...you can buy a new one for about $1200 and part out the wrecked one for $$ or to keep for the new one.

02-19-2007, 09:02 PM	#1
ant Join Date: Dec 2006 Posts: 28	where? where can i get good parts to fix my lifan gy-5 back up??
	0

02-19-2007, 09:14 PM	#2
bfe71730 Join Date: May 2006 Location: South Arkansas Posts: 198	ohh, CHIT, looks like you need a whole new bike, are you OK? what parts do you need? __________________ 2004 KAZUMA CHEETAH 200 2001 Yamaha Big Bear 400 1986 Honda ATC 250ES 1983 Honda ATC 200X 1974 Kawasaki KE100
	0

02-19-2007, 10:19 PM	#12
dlunt Join Date: May 2006 Location: Camby, Indiana Posts: 494	Well if you don't keep an eye on the spoke tension, the front wheel will end up looking like that anyway. :twisted: Glad you are okay man! My son hit one of those "things" on his second ride out. Right over the handlebars. No bike damage and the helmet also did it's job too. __________________ 2006 Flywing(Jianshe)100 2002 Suzuki DR650
	0

02-20-2007, 06:31 AM	#13
Roketarider Join Date: Jan 2007 Posts: 124	Contact the guys on here with shops, they should get you squared away, butmaybe you could piece together some other item from other bike and fabricate it on your bike, like a headlamp? __________________ Roketa DB-07A 200cc
	0

02-20-2007, 07:26 AM	#14
red2003 Join Date: Jan 2007 Location: Northern Vermont, USA Posts: 1,251	Are you sure those front forks aren't tweeked? It sure looks it in the pic. If you're going to need new forks, front wheel (definately) and all that other stuff, it might be just as cheep to buy a new bike. Seriously. I can guarantee that if your rolled it, the rear frame is tweeked also, and probably lots of other stuff you haven't dug into yet. You're looking at $500.00+ in parts alone. Sorry for your spill, but very glad to hear you walked away. __________________ First Chinabike: 2006 Roketa RSX200E Current Chinabikes: 2023 Titan DLX & 2022 Lifan KP Mini w/ 210cc BRT kit, 22 RWHP!
	0

02-19-2007, 09:14 PM	#3
ambassador Join Date: Jan 2007 Location: Bradenton, Florida Posts: 1,200	Ouch, how did you manage that? There are a couple of guys on this site that have parts for these bikes, I'm sure if you talked to them they could help you out, just read the forums, it may help you out with other things regarding your bike as well..
	0

02-19-2007, 09:15 PM	#4
Ferrit Join Date: Nov 2006 Location: Lawrenceburg, KY Posts: 178	I'm hoping you forgot to tie down the bike in the back of your truck and it fell out!! Hope you're OK Ant.
	0

02-19-2007, 09:23 PM	#5
ant Join Date: Dec 2006 Posts: 28	no i was on the bike and hit some ditch thing i didnt see and i rolled an whole bunch of times i didnt really get hurt because i wore my helment
	0

02-19-2007, 09:29 PM	#7
ant Join Date: Dec 2006 Posts: 28	i need everything up front i will get a better pic tomorrow
	0

02-19-2007, 09:45 PM	#8
ambassador Join Date: Jan 2007 Location: Bradenton, Florida Posts: 1,200	Glad to hear your OK, Helmets save lives, you got some work, I'm sure it looks worse than it is, new rim, fender.. Did your forks bend??? The guys here will take care of you and your bike...I'm sure they have or can lead you in the right direction for parts...
	0

02-19-2007, 09:48 PM	#9
ant Join Date: Dec 2006 Posts: 28	no the forks are straight i need a hood,headlight,guages,ignition.brake lever,clutch cable,speedo cable and some other stuff. was going about 40 mph
	0

02-19-2007, 09:55 PM	#10
ambassador Join Date: Jan 2007 Location: Bradenton, Florida Posts: 1,200	Man, That sux... Welcome to the site... There's alot of cool people here that all have China bikes and don't give anyone any crap for owning one.. May I suggest ejcycles or RPM, they are both members here and have their own shops and carry some parts for these bikes, I'm sure they can point you in the right direction for all that you need...
	0

02-19-2007, 10:04 PM	#11
ambassador Join Date: Jan 2007 Location: Bradenton, Florida Posts: 1,200	Were you drinking wine????
	0

02-20-2007, 09:53 AM	#15
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,035	Glad to read that you are ok. You now have the potential to become the poster child for the low price of these bikes...you can buy a new one for about $1200 and part out the wrecked one for $$ or to keep for the new one. __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0