Vitacci Tank 200 EFI Deluxe - Page 4

**JerryHawk250** · 11-21-2024, 12:46 PM

Hit post reply. You should be in advanced mode. Click on the paper clip on the tool bar at the top, then select the file then upload.

Picollo · Yesterday, 12:05 PM

Quote:

Originally Posted by JerryHawk250

Hit post reply. You should be in advanced mode. Click on the paper clip on the tool bar at the top, then select the file then upload.

Thank you

danklyrides · Yesterday, 11:56 PM

I found the PMC ECU for the 161QMK 169cc engine

PMC Racing

The price is a bit much for me consider seriously. Maybe some night after a few drinks I will see things differently

danklyrides · Today, 07:50 AM

As mentioned earlier, I put an oil cooler on my Tank a while ago. I don't have good pics of the install right now but these are the parts I got:

Oil Cooler

Electric Fan

The cooler holds 125ml of oil plus the extra capacity of the lines so it gives me a good boost in the amount of oil. It attaches to the engine in place of the stock oil strainer and has a strainer built in to one of the lines. I wired the fan up to the battery going through a relay that is triggered from the headlight. This way, the fan will not run unless the engine is running. I also wired a switch inline that I mounted next to the ignition switch.

To make sure I had sufficient oil flow to push through the cooler I installed this super high flow oil pump that I got from eBay. It was a pretty simple install.

I mounted the cooler under the floor behind the battery and in front of the engine. The Tank has a pretty good area to accommodate this but it definitely took some work to get it situated.

The next time I have the plastics off I will try to get some better pictures.

Cheers!
Dankly

11-21-2024, 12:46 PM	#46
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,739	Hit post reply. You should be in advanced mode. Click on the paper clip on the tool bar at the top, then select the file then upload. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	1

Today, 07:50 AM	#49
danklyrides Join Date: May 2024 Location: Idaho, USA Posts: 38	As mentioned earlier, I put an oil cooler on my Tank a while ago. I don't have good pics of the install right now but these are the parts I got: Oil Cooler Electric Fan The cooler holds 125ml of oil plus the extra capacity of the lines so it gives me a good boost in the amount of oil. It attaches to the engine in place of the stock oil strainer and has a strainer built in to one of the lines. I wired the fan up to the battery going through a relay that is triggered from the headlight. This way, the fan will not run unless the engine is running. I also wired a switch inline that I mounted next to the ignition switch. To make sure I had sufficient oil flow to push through the cooler I installed this super high flow oil pump that I got from eBay. It was a pretty simple install. I mounted the cooler under the floor behind the battery and in front of the engine. The Tank has a pretty good area to accommodate this but it definitely took some work to get it situated. The next time I have the plastics off I will try to get some better pictures. Cheers! Dankly Attached Thumbnails
	1

Yesterday, 11:56 PM	#48
danklyrides Join Date: May 2024 Location: Idaho, USA Posts: 38	I found the PMC ECU for the 161QMK 169cc engine PMC Racing The price is a bit much for me consider seriously. Maybe some night after a few drinks I will see things differently
	0