Hangkai 18HP 2 Stroke Outboard - Page 2

**JerryHawk250** · 07-14-2024, 07:12 PM

Quote:

Originally Posted by bigdano711

That thing purrs just like my Hawk. Very nice. Can't wait for some WOT footage.

It's a smooth running little engine. I'll do that when My new prop comes in.

Bruces · 07-14-2024, 08:33 PM

Not sure this will work (I have not uploaded a picture here in years ) ,but if you are going to build a boat ,build it like mine .No plans ,just made out of a bunch of aluminum scrap (noses of transport trailers to be more precise ) ,extremely useful ,I bring my Jeep to camp on the boat ,can fish from it ,party on it ,camp on it ,and I don’t have to worry about it rotting away .I have even taken it over class 2 rapids up and down with a lift of lumber on it .I recently repowered it with a 30hp Honda so it scoots along pretty quick now .

**JerryHawk250** · 07-31-2024, 09:38 AM

After installing the Bimini top, I had taken the boat out Saturday morning between the rain shower to test out the 11 pitch prop. Looks like i got it dialed in perfect. I only picked up a couple MPH but did get my rpm's down to where the should be. 26 mph @ 5,650 rpm's with just me in the boat. I'm sure once i add gear and another person it will be perfect.

**JerryHawk250** · 07-31-2024, 01:39 PM

Here's a few progress pictures on the boat.

**JerryHawk250** · 08-27-2024, 11:13 AM

I'm in the process of building a combination power trim/jack plate for the little engine. You can buy them already made but cost almost as much as the motor. I'm not spending over $850 for something i can fab myself. A friend of mine owns a fab shop and gave me some scrap pieces of 4 x 4 angle and 1/4" aluminum plate. I fabricated everything up Sunday afternoon since I couldn't go fishing because of he rain. This only took me an hour to put together. I needed to put it together before I could order the actuator as i didn't know the exact length i would need. I knew it would be between 4-6". It turned out that i would only need it to have 4" of travel. The actuator should arrive tomorrow so I should have it ready for the weekend to test out. Here's the actuator I ordered. https://amzn.to/4cHCSyz

**JerryHawk250** · 08-28-2024, 09:03 PM

Power trim is done. Now just have to install it on the boat.

Bruces · 08-28-2024, 09:13 PM

Nice job ,I can use one of those myself .

**JerryHawk250** · 08-28-2024, 09:50 PM

Quote:

Originally Posted by Bruces

Nice job ,I can use one of those myself .

Thanks. Pretty easy to make. It's all bolted so no welding. The actuator is pretty powerful for being so small.

**JerryHawk250** · 09-01-2024, 08:59 AM

I mounted the power trim jack plate yesterday between the rain showers. I'm hoping I can get out today and test it out. Weather doesn't look to promising though.

Bruces · 09-01-2024, 10:01 AM

That is very nice.

**JerryHawk250** · 09-02-2024, 07:26 AM

New top speed with the jack plate.

Bruces · 09-02-2024, 08:36 AM

Very nice boat you have built yourself Jerry .

**JerryHawk250** · 09-03-2024, 08:02 AM

I took the family out fishing yesterday. Boat still ran pretty good even with three people, two ice chest and gear. I'm impressed with the little motor.
https://youtube.com/shorts/Lne5QgXS-...UDU_1bxMcDAz5H

07-14-2024, 08:33 PM	#17
Bruces Join Date: May 2018 Posts: 1,649	Not sure this will work (I have not uploaded a picture here in years ) ,but if you are going to build a boat ,build it like mine .No plans ,just made out of a bunch of aluminum scrap (noses of transport trailers to be more precise ) ,extremely useful ,I bring my Jeep to camp on the boat ,can fish from it ,party on it ,camp on it ,and I don’t have to worry about it rotting away .I have even taken it over class 2 rapids up and down with a lift of lumber on it .I recently repowered it with a 30hp Honda so it scoots along pretty quick now . Attached Thumbnails
	2

07-31-2024, 09:38 AM	#18
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	After installing the Bimini top, I had taken the boat out Saturday morning between the rain shower to test out the 11 pitch prop. Looks like i got it dialed in perfect. I only picked up a couple MPH but did get my rpm's down to where the should be. 26 mph @ 5,650 rpm's with just me in the boat. I'm sure once i add gear and another person it will be perfect. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	3

07-31-2024, 01:39 PM	#19
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	Here's a few progress pictures on the boat. Attached Thumbnails __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	3

08-27-2024, 11:13 AM	#20
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	I'm in the process of building a combination power trim/jack plate for the little engine. You can buy them already made but cost almost as much as the motor. I'm not spending over $850 for something i can fab myself. A friend of mine owns a fab shop and gave me some scrap pieces of 4 x 4 angle and 1/4" aluminum plate. I fabricated everything up Sunday afternoon since I couldn't go fishing because of he rain. This only took me an hour to put together. I needed to put it together before I could order the actuator as i didn't know the exact length i would need. I knew it would be between 4-6". It turned out that i would only need it to have 4" of travel. The actuator should arrive tomorrow so I should have it ready for the weekend to test out. Here's the actuator I ordered. https://amzn.to/4cHCSyz Attached Thumbnails __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	3

08-28-2024, 09:03 PM	#21
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	Power trim is done. Now just have to install it on the boat. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	2

08-28-2024, 09:13 PM	#22
Bruces Join Date: May 2018 Posts: 1,649	Nice job ,I can use one of those myself .
	1

09-01-2024, 08:59 AM	#24
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	I mounted the power trim jack plate yesterday between the rain showers. I'm hoping I can get out today and test it out. Weather doesn't look to promising though. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	4

09-01-2024, 10:01 AM	#25
Bruces Join Date: May 2018 Posts: 1,649	That is very nice.
	1

09-02-2024, 07:26 AM	#26
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	New top speed with the jack plate. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	2

09-02-2024, 08:36 AM	#27
Bruces Join Date: May 2018 Posts: 1,649	Very nice boat you have built yourself Jerry .
	1

09-03-2024, 08:02 AM	#28
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	I took the family out fishing yesterday. Boat still ran pretty good even with three people, two ice chest and gear. I'm impressed with the little motor. https://youtube.com/shorts/Lne5QgXS-...UDU_1bxMcDAz5H Attached Thumbnails __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel Last edited by JerryHawk250; 09-03-2024 at 05:16 PM.
	3