![]() |
#1832 |
Join Date: Aug 2024
Posts: 1
|
Just returned from my first ride. Everything is stock. I'm impressed!
During assembly I removed the carb, pulled the plug off the low speed jet, found it to be 3/4 turns out. 120 main, 40 pilot, it started instantly and runs fantastic at 0-1500 ft, 70 degrees. That surprised me. As did the magnet in the drain plug, the need to remove the upper engine mount to remove the intake valve cover and battery removal to get at the air filter. My left peg mount was welded on incorrectly resulting in the peg angled back a bit. A grinder took care of that. During assembly I noticed the front wheel was out of round. I rode a small combination of paved, gravel and single track today, only 40 miles, but enough to get an initial impression of the suspension and handling. She's a keeper for sure. |
![]() |
![]() |
#1833 |
Join Date: Jul 2024
Location: Houston, TX
Posts: 33
|
Just got done taking my Templar for a short test ride around the neighborhood. The bike performed wonderfully even with the stock jetting, will still fatten it up a bit if my jet kit ever gets here. The only issue it had was a non functioning speedometer/odometer, went back thru all the connections and found nothing out of sorts. All the other functions of the display work fine (tach, shift indicator, voltmeter, etc.). I unplugged the wheel sensor and using a multi meter I looked for any kind of signal when I spun the front wheel and got nothing. Guess I have a dead speed sensor? Sent an email off to Zora at PSM, hope they come through on sending me the parts so I can get the speedometer working. Kinda need a working speedometer to pass inspection so I can get my registration.
__________________
CC-John "I void warranties" 2024 Templar 250 X 2018 Nissan Frontier (work truck) 2006 Ford F-150 Crew cab (play truck) 1973 Century Resorter 16 (Floating Muscle Car) |
![]() |
![]() |
#1834 |
Join Date: Nov 2022
Location: Dallas TX
Posts: 609
|
You might want to talk with DPS, there is a short window to register after purchase of vehicles and once that time lapses there might be a fine; it’s all based on the original paperwork date.
The speed sensor is a magnetic Hall effect type. A disc on the wheel and a sensor that you can screw in and out that will sense the disc passing underneath as the wheel as it rotates. You can inspect the wheel for the physical components being present. You can adjust the sensor closer to the wheel if needed; the idea being close enough to read the field during rotation but far enough away that any flex of the wheel during riding won’t allow physical contact to occur.
__________________
2022 1/2 Templar X 250 - 6 gear model - 13 Front / 40 Rear Sprockets - #42 / #120 Jets - 1mm thick nitrile O-ring needle shim (removed) - Kenda K761 Dual Sport Tires - Sedona Standard Thickness Inner Tubes - Stock OEM battery, carburetor, spark plug still going strong - https://youtu.be/dhAYEKH-jFQ |
![]() |
![]() |
#1835 | |
Join Date: Jul 2024
Location: Houston, TX
Posts: 33
|
Quote:
I still have a couple weeks to get the bike registered before any late penalties are applied. The shop I'm using for my initial safety inspection is a shop I've used for over 20 years for routine vehicle maintenance, and I'm pretty tight with the owner and manager. If needed, pretty sure I can get them to "overlook" a non functioning speedometer on the inspection. I would prefer to not have to resort to that, but it's available as an option.
__________________
CC-John "I void warranties" 2024 Templar 250 X 2018 Nissan Frontier (work truck) 2006 Ford F-150 Crew cab (play truck) 1973 Century Resorter 16 (Floating Muscle Car) |
|
![]() |
![]() |
#1836 |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,571
|
We are so lucky that MO doesn't require safety inspection on new vehicles. In fact the inspection free registration was extended to 150k miles
![]() Proof of financial responsibility (liability only) is required, and must show personal property tax receipts. BOS isn't even required if it already has a MO title.
__________________
-NOS 2020 KTM 250SX (2-stroke motocross) |
![]() |
![]() |
#1837 | |
Join Date: Jul 2024
Location: Houston, TX
Posts: 33
|
Quote:
__________________
CC-John "I void warranties" 2024 Templar 250 X 2018 Nissan Frontier (work truck) 2006 Ford F-150 Crew cab (play truck) 1973 Century Resorter 16 (Floating Muscle Car) |
|
![]() |
|
![]() |
![]() |
|
|