04-12-2022, 08:25 AM
|
#1 |
|
Join Date: Aug 2021
Posts: 58
|
Help - Fuel sender mount bolts spinning
The fuel sender is held down by four square-head screws caged in a metal bracket. The bracket is welded on, and is not tight enough to keep the screws from spinning. 3 of the nuts are frozen. I tried cutting slots for a screwdriver, and jamming a probe under to lock up the screw head, but I can't get a tigth enough grip to break the nuts loose, even with a impact driver. Any ideas before I cut the nuts off and have to rework the bracket.
|
|
|
04-12-2022, 08:56 AM
|
#2 |
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,590
|
Try hit it with some PB Blaster Penetrating lube and let soak for a few hours.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
|
|
 |
|
|
Linear Mode
