Hawk plumbing project

[Ol,fart]

I built a new tool box for my hawk. Materials required 14 inch x4 inch pvc, solid end cap , screw plug end cap, roll of plumber strap, handful of 1/2" self drilling screws.
Front strap bolted to rear tool box boss, rear strap to turn signal bolt.
Will try to add a picture if I can.

[Ol,fart]

pic attempt 3

[Boatguy]

That’s pretty nice! Probably balances out the awful lopsided look of all these bikes too.

I’ve never liked the exhaust sticking out one side. My panniers are harder to use and look uneven from it too.

Very nice!

[Hunnicutt]

I like that! I'm thinking about building those for my TT250's. Can you please post a picture of the rear of the bike?

[JerryHawk250]

Nice job!
These Manual Storage Tubes work well too. https://www.amazon.com/Porotmotor-Mo...38&sr=8-4&th=1

[Ol,fart]

Originally Posted by Hunnicutt

I like that! I'm thinking about building those for my TT250's. Can you please post a picture of the rear of the bike?

this is the only other pic I have avalable to day. let me know,I can take more tomorrow if you need.

[Ol,fart]

Originally Posted by JerryHawk250

Nice job!
These Manual Storage Tubes work well too. https://www.amazon.com/Porotmotor-Mo...38&sr=8-4&th=1

thanks I built it big enough to carry tubes and tools for my quick change sprocket setup. I've figured out a way to use 12-17 tooth front. for six ratios 3.33 to 2.35 in a couple minutes.
will post a thread on that at a later date.

[JerryHawk250]

Originally Posted by Ol,fart

thanks I built it big enough to carry tubes and tools for my quick change sprocket setup. I've figured out a way to use 12-17 tooth front. for six ratios 3.33 to 2.35 in a couple minutes.
will post a thread on that at a later date.

Yeah, I have my tool tube stuffed with three tire irons, patch kit, air pump and other misc. stuff like zip ties, master links, tape....yada, yada yada . lol

Here's a good sprocket calculator. Information for the hawk is already in there. https://www.gearingcommander.com/