05-23-2020, 04:17 PM | #1 |
Join Date: May 2020
Location: Ma
Posts: 15
|
Need a legitimate jet kit for 2020 brozz 250 please
Ordered a kit on Amazon it just arrived. $39.95 it included a 107.5 a 112.5 a 38 a few washers a wood screw and a drill bit. Pretty pissed the bike already has a 105 those are useless. Any suggestions or insite as to why I got a a countersunk wood screw? Also a link with a real assortment of jets. Amazon link? I would appreciate it. Thank you is the carb a keihin pe 30?
|
|
05-23-2020, 04:28 PM | #2 |
Join Date: May 2020
Location: Ma
Posts: 15
|
|
|
05-23-2020, 05:06 PM | #3 |
Join Date: Jun 2016
Location: Arlington, VA
Posts: 258
|
__________________
4 time WERA SuperVintage Roadracing National Champion, SCTA Land Speed Record Holder, 3rd AMA Motorcycle GP of Miami |
|
05-23-2020, 06:47 PM | #4 |
Join Date: Sep 2019
Location: Springfield, KY
Posts: 83
|
That kit looks like its for tuning a stock Hawk carb. Hawks come with tamper proof bowl screws, a rubber plug over the fuel screw, a needle without clip slots, and a weird pilot jet.
If you dont know what carb you have, we need a picture of both sides. Is it the carb that came with your bike? If its the factory carb, its definitely not a PE30. They are often a "sealed" PZ30 but you said you've already been inside the carb. www.jetsrus.com can help you identify your jets
__________________
2018 Hawk - Nibbi PE30, Nibbi Intake, UNI Filter, Ebay Exhaust, NGK 4929 (non-Iridium), 428 D.I.D. X-Ring, 15/40 Sprockets, Walmart AGM Battery, IMS Shifter, Full LED Lighting, Digital Cluster, CSC Swingarm Pin, Modified Chain Adjusters, Upgraded Wheel Bearings ** MPH Cruise, ** MPG Last edited by Baskt_Case; 05-23-2020 at 08:39 PM. |
|
05-24-2020, 02:27 AM | #5 |
Join Date: Jun 2016
Location: Hell
Posts: 2,408
|
That’s an expensive kit but looks right
1 pilot several main jets |
|
05-24-2020, 08:46 AM | #6 |
Join Date: May 2020
Location: Ma
Posts: 15
|
Thanks guys. Yea I thought it was going to be a very complete and extensive kit. I dont know what carb,
The bike is arriving Tuesday. I just want to have something on hand to tune it if necessary. |
|
05-25-2020, 09:04 AM | #7 |
Join Date: May 2020
Posts: 13
|
Yep link mtiberio sent is what you need. I actually over drilled my main, got a piece of copper wire macgyvered in there to restrict flow until my kit comes in.
|
|
|
|
|
|