Venom X22 125 brakes vs. 250 brakes.

Psomniferum · 03-14-2020, 05:19 PM

I own an X22/125cc from Venom Motorsports. I'm 95% sure the 250cc model has better brakes, springs, etc. compared to the 125cc model. I plan on upgrading my bike with the heavier pieces to help keep up with the beefed-up 150cc I'm transplanting. Can any X22/250 owners tell me what good aftermarket brakes and/or suspension you have used on your ride? Would it be practical for me to gut a wrecked cbr250 and go from there? I know they use identically-sized rims. Although my 125cc uses 5-lug rotors that eerily remind me of a Grom! I'd really appreciate any and all advice. Brand new to bikes.

**JerryHawk250** · 03-16-2020, 10:06 AM

The brake calipers don't look like they will be a direct swap. Mounts are completely different. My bike is still new so haven't even though about upgrade pads. Brakes are pretty good as is. I'm not sure what pads your bike will take but i would think they are a copy of some name brand bike so you should be able to find a better quality pad. Go to EBC Brakes website there is a motorcycle brake catalog you can download and match up the pads. That's what i did for my hawk.

https://ebcbrakes.com/usa-automotive...p-dci-iwebcat/

Psomniferum · 03-16-2020, 10:32 AM

Thanks for the link! I have been looking at pads online and in person. I believe my pads resemble the Honda Grom's brakes. Before my bike was stolen, I was able to put close to 300x miles on it. Already, I was not satisfied with the brakes. Experienced brake fade very early on! My 1st choice would be to upgrade to all the 250-model pieces. Venom had a little trouble helping me replace the stock pieces on my bike, let alone pieces for a 250. I'll have to find a part distributor for these Baodiao 250-clones.

PS- From what I've been able to find out, the 125cc model of the Venom X22 is only for California (lucky me!) and there aren't that many out there. They call it the "Green" model on their site, LOL!

**JerryHawk250** · 03-16-2020, 10:41 AM

Did you clean the rotors real good with brake cleaner? If not, just about all these china bikes come with some kind of rust inhibitor oily film on them. The rotors might be slight glazed. Try scuffing them up with a scotch bright pad and scuff up your pads with sand paper on a flat surface. Clean up the rotors again with brake cleaner.

03-14-2020, 05:19 PM	#1
Psomniferum Join Date: Jan 2020 Location: California Posts: 75	Venom X22 125 brakes vs. 250 brakes. I own an X22/125cc from Venom Motorsports. I'm 95% sure the 250cc model has better brakes, springs, etc. compared to the 125cc model. I plan on upgrading my bike with the heavier pieces to help keep up with the beefed-up 150cc I'm transplanting. Can any X22/250 owners tell me what good aftermarket brakes and/or suspension you have used on your ride? Would it be practical for me to gut a wrecked cbr250 and go from there? I know they use identically-sized rims. Although my 125cc uses 5-lug rotors that eerily remind me of a Grom! I'd really appreciate any and all advice. Brand new to bikes. __________________ 2018 Venom x22/125cc (Baodiao 125-11) Lifan 150cc w/TB V2 roller-rocker head, Mikuni vm26 carb, and FMF muffler Last edited by Psomniferum; 03-16-2020 at 10:28 AM.
	0

03-16-2020, 10:06 AM	#2
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,589	The brake calipers don't look like they will be a direct swap. Mounts are completely different. My bike is still new so haven't even though about upgrade pads. Brakes are pretty good as is. I'm not sure what pads your bike will take but i would think they are a copy of some name brand bike so you should be able to find a better quality pad. Go to EBC Brakes website there is a motorcycle brake catalog you can download and match up the pads. That's what i did for my hawk. https://ebcbrakes.com/usa-automotive...p-dci-iwebcat/ __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	1

03-16-2020, 10:32 AM	#3
Psomniferum Join Date: Jan 2020 Location: California Posts: 75	Thanks for the link! I have been looking at pads online and in person. I believe my pads resemble the Honda Grom's brakes. Before my bike was stolen, I was able to put close to 300x miles on it. Already, I was not satisfied with the brakes. Experienced brake fade very early on! My 1st choice would be to upgrade to all the 250-model pieces. Venom had a little trouble helping me replace the stock pieces on my bike, let alone pieces for a 250. I'll have to find a part distributor for these Baodiao 250-clones. PS- From what I've been able to find out, the 125cc model of the Venom X22 is only for California (lucky me!) and there aren't that many out there. They call it the "Green" model on their site, LOL! __________________ 2018 Venom x22/125cc (Baodiao 125-11) Lifan 150cc w/TB V2 roller-rocker head, Mikuni vm26 carb, and FMF muffler
	0

03-16-2020, 10:41 AM	#4
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,589	Did you clean the rotors real good with brake cleaner? If not, just about all these china bikes come with some kind of rust inhibitor oily film on them. The rotors might be slight glazed. Try scuffing them up with a scotch bright pad and scuff up your pads with sand paper on a flat surface. Clean up the rotors again with brake cleaner. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0