02-17-2020, 10:47 PM | #1 |
Join Date: Jan 2020
Posts: 287
|
Stand by me
Has anyone took a grinder to their Brozz kick stand mounting bracket? The kick stand on my Brozz doesn’t come down and rest in a forward direction. The bike stands upright. I’ve found while wrenching that I’ve shifted the bikes weight at least a half a dozen to the point I though it was gonna fall. I’d have to grab the bike and reposition the stand. Yes , I know. I have a work stand but it a bear to get the bike on it as it slides easily on the painting concrete in the garage.
I was thinking if I grind away some metal it would allow for the kick stand to rest in a more forward position and be less likely to a tip over. |
|
02-18-2020, 08:26 AM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,707
|
I think that's a good idea. I just did something similar on my X22R. I had the opposite issue. My kick stand hung too low when in the up position. Took a grinder to it and now it sit parallel to the ground.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
|
|