01-11-2019, 10:50 AM | #1 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,064
|
Hawk/TT250/etc stainless spokes.
So, after the Supermoto wheel post came up, and out of my own curiosity, I started searching, and came across this company on Aliexpress that offers Stainless steel spokes in lots of 40 for about half the price of what a Buchanan's set would cost.
One listing by said seller. https://www.aliexpress.com/item/JQOR...4badPxopSg&s=p If my memory serves me correctly, the 18" rear wheel uses 90 degree spokes in a 162mm length and 4.0mm diameter. The spoke nuts dimensions would be all that is missing if somebody has a spare sitting around. The only thing I need to figure out now is some information on the front spokes. If I remember right, they are 3.5mm diameter. What I don't know is the head angle or length. Also the spoke nut specs Anybody have a spare spoke sitting around, or a wrecked rim they could pull one from, that is willing to do a length and angle measurement? This would be an amazing option to have, not only because I simply like stianless steel spokes, but for guys that want to potentially run different rim diameters.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
01-11-2019, 11:16 AM | #2 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,064
|
EDITED:
I went ahead and ordered one of each spoke part number for the TT250 from CSC with one spoke nut each. I figure for less than $12, why not? They list 2 part numbers for each, which I can only assume is inner and outer spokes. Now I have spares just in case. At least this way the actual spoke information can be documented.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
01-11-2019, 11:18 AM | #3 | |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,591
|
Quote:
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
01-11-2019, 12:01 PM | #4 | |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,064
|
Quote:
I wish I didn't have to order a full set of them to just get the two I need for dimensions. I also don't feel like disassembling my rear wheel. just to measure two spokes. Condundrum. Guess I will order the set from Aliexpress. I can always sell some off to other guys that might want spares maybe and recover some of the cost.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
|
01-11-2019, 12:34 PM | #5 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,064
|
Well, if anybody wants some spare rear wheel spokes, let me know. Just ordered the Aliexpress set.
My main interest in this is that I want to also order the Aluminum rims I have been eyeballing on Aliexpress as well. https://www.aliexpress.com/item/6061...295d2e0eyGZk6B
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
01-11-2019, 04:46 PM | #6 |
Join Date: Jan 2012
Location: ChCh , NZ
Posts: 2,262
|
Might get set of those spokes for the KL250 rear wheel..
Probably need 2 sets...Just looking at it I have feeling it uses 2 spoke lengths..
__________________
09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com |
|
01-11-2019, 07:19 PM | #7 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,064
|
If you dig enough through his store/listings he does sell them in smaller lots of 10 and 20 as well. Not very intuitive to find them, but they are there.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
01-11-2019, 09:37 PM | #8 |
Join Date: Jun 2016
Location: Hell
Posts: 2,408
|
I have a spoke supplier in my vast array of people I know in China, I just got no clue as to what spokes the Hawk uses etc.
Steel and stainless steel possible as well as CNC ali nuts/nubs for the spoke ends |
|
01-11-2019, 11:08 PM | #9 | |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,064
|
Quote:
My main interest is stainless steel spokes and nuts. If you can come in a decent amount under $200 with shipping included for a set of front and rear spokes, You would have a customer.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
|
01-14-2019, 02:16 PM | #10 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,064
|
Got the front spokes and nipple in from CSC.
Measuring the same points as they show in this listing, everything is more or less the same, angle, diameters, even the spoke nipples. So for the stock rims these should work just fine. https://www.aliexpress.com/store/pro...14e92f4fCNEG4R Lengths would need to be 230mm 235mm if I go off of their picture, and I don't see an option to custoize. Nor do I find any options for 10 or 20 spoke sets, so you would have to order 40 of each length in order to do it properly. I need to double check the angle, but 95 degrees looks correct. I sent the seller a message asking about an order of 20 of each length to see what they say. Otherwise, you might have to split the purchase with somebody to make this cost effective, because if not it would actually be about the same price to simply buy from Buchanan's, and the Buchanan's nipples would also be stainless instead of plated brass.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
09-02-2019, 10:22 PM | #11 |
Join Date: Jun 2019
Posts: 35
|
So Megadan with the tt250 spokes did you order 18 for one side and 18 for the other side? I see there is two part numbers I assume inner outer.
__________________
"If there's no modifications it's not fast enough!!!! Hawk250RedRyder2018 FlyRacing/D.I.D./ProTaper/JTSprockets/Nibbi30/DPR9EIX/PNP/KendaWashougal2/Acerbis/AlpinestarsTech5/HJC/.........TheRideContinues........RockyMountainHigh ..........LIFE ELEVATED!!!! |
|
|
|
|
|