06-20-2019, 07:50 AM
|
#46 |
|
Join Date: Apr 2017
Location: Woods, Maine
Posts: 247
|
Yeah that should work, I can convert to mm. Thanks!
|
|
|
06-20-2019, 09:25 PM
|
#47 |
Join Date: Sep 2018
Posts: 403
|
What exactly do you want measured?
|
|
|
|
06-21-2019, 10:34 AM
|
#48 | |
|
Join Date: Apr 2017
Location: Woods, Maine
Posts: 247
|
Quote:
|
|
|
|
|
06-21-2019, 01:22 PM
|
#49 |
|
Join Date: Sep 2018
Posts: 403
|
Okay cool. It is pouring rain out. It should die down soon. For now, if you're just looking for a filter that will fit this will https://www.amazon.com/gp/product/B000N5UCEG/
|
|
|
|
06-21-2019, 02:19 PM
|
#50 |
|
Join Date: Apr 2017
Location: Woods, Maine
Posts: 247
|
51mm got it. thanks!
|
|
|
|
06-21-2019, 04:45 PM
|
#51 |
|
Join Date: Sep 2018
Posts: 403
|
I was pretty sure it was but I didn't want to guess. I went out to measure, ended up installing a gear sensor and some how drained the battery. Since the battery was full moments before connecting the gear sensor, I thought I was blowing fuses left and right... even after removing the gear sensor. I thought I fried something and forgot all about taking a measurement. My bad.
Anyways, do you have another thread with pics of your bike? I remember you mentioned doing the swap a while back but I can't find the thread with photos? |
|
|
|
06-22-2019, 03:17 PM
|
#52 |
|
Join Date: Sep 2018
Posts: 403
|
The gear sensor swap works fine. I have no idea what cause the instant battery drain yesterday but today i put in the sensor again, everything lit except 5th then I dropped in the 17t front sprocket. I really like it now. If only I could get the top end dialed in. Main jet and maybe a new coil... IDK
|
|
|
|
06-25-2019, 11:19 AM
|
#53 |
Join Date: Aug 2018
Posts: 286
|
From what rpm does it start to have problems? what does it do?
__________________
2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks |
|
|
|
06-25-2019, 02:02 PM
|
#54 | |
|
Join Date: Apr 2017
Location: Woods, Maine
Posts: 247
|
Quote:
|
|
|
|
|
06-25-2019, 03:02 PM
|
#55 | |
|
Join Date: Sep 2018
Posts: 403
|
Quote:
On, the stock motor, when I put the new carb on, it 'bogged out' at high RPM that was too rich. The 190 just putting around without opening it up is so much more usable than the stock motor all dialed in. It is true what they say about less vibration. |
|
|
|
|
08-09-2019, 04:33 AM
|
#56 |
|
Join Date: Aug 2018
Posts: 286
|
FINALLY....zs190 in and running. This motor is awesome! With the 125 I didn't have to look at speed but now it's way to easy to speed, even in 5th gear it pulls, it definitely redefines the bike. Love it!!!
__________________
2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks |
|
|
|
|
|
 |
|
|
Linear Mode
