05-08-2019, 12:45 AM
|
#1 |
Join Date: Sep 2018
Posts: 403
|
Will this work - I need to remove throttle play
https://www.amazon.com/Yibid-Motorcy...dp/B078ZV15JL/
The adjuster is extended all the way and there is still too much play. This thing appears to have 4 cable mounting positions. My thoughts is I could use a position that takes up more slack on the cable. I just don't know if everything else will fit. Thoughts? |
|
|
05-08-2019, 05:32 AM
|
#2 |
|
Join Date: Jun 2018
Location: Florida
Posts: 759
|
I don't see why it wouldn't , assuming your cable isn't so long it will be in the last hole by default , giving you no additional adjustment .On the bright side , it would still be of higher quality than the stock part, and it is a "quick twist" setup .
__________________
2001 Mustang GT 2004 Sportster 2018 VADER 2020 Orion RXB250L |
|
|
|
05-08-2019, 03:50 PM
|
#3 |
|
Join Date: Sep 2018
Posts: 403
|
Thanks, I am going to order it and I am debating ordering a genuine Mikuni. I like the idea of being able to change out the main jet without removing the carb. Also, some people (in the Amazon review section) reported the pilot jets for the real Mikunis were not fitting the Mikuni clone carbs.
Part of me wants to put more time and money into it but then it literally is falling apart. Perhaps just putting that money towards a new bike would be best. IDK Last edited by scoot newb; 05-08-2019 at 07:32 PM. |
|
|
|
05-08-2019, 04:52 PM
|
#4 |
|
Join Date: May 2019
Posts: 12
|
i think imma try the same thing scoot... message back in if you do try it.. I think ill buy it also
|
|
|
|
05-08-2019, 07:42 PM
|
#5 |
|
Join Date: Sep 2018
Posts: 403
|
It was out of stock so I ordered a grip kit that included the same quick throttle for a few dollars more.
https://www.amazon.com/gp/product/B078LSLYBS |
|
|
|
05-08-2019, 09:52 PM
|
#6 |
|
Join Date: Sep 2018
Posts: 403
|
F$ck it, I've ordered a Genuine Mikuni and Uni Filter too. I am just going to keep dumping money into this thing. I almost ordered a 190 but a lot of the FB groups talk about trouble with the gear box and adding an oil cooler is mandatory unless you want trouble. I don't want that much of a project on my hands at the moment.
|
|
|
|
05-08-2019, 11:02 PM
|
#7 | |
|
Join Date: Sep 2018
Posts: 403
|
Quote:
|
|
|
|
|
05-09-2019, 03:05 PM
|
#8 |
|
Join Date: May 2019
Posts: 12
|
says the throttle tube on those grips wont fit a grom.
|
|
|
|
05-09-2019, 03:07 PM
|
#9 |
|
Join Date: Sep 2018
Posts: 403
|
There are now 4 people on the FB group who say they have them and it works.
|
|
|
|
05-09-2019, 03:08 PM
|
#10 |
|
Join Date: May 2019
Posts: 12
|
sweet.. thank you!!! what color did you get
|
|
|
|
05-09-2019, 03:14 PM
|
#11 |
|
Join Date: Sep 2018
Posts: 403
|
The ones I originally linked and ordered were going to take too long to arrive. These are coming Saturday.
https://www.amazon.com/gp/product/B07LFPF1W5/ They all have the same throttle tube. |
|
|
|
05-09-2019, 03:24 PM
|
#12 |
|
Join Date: May 2019
Posts: 12
|
yellow.. coming saturday
https://www.amazon.com/gp/product/B0...iglink28144-20 |
|
|
|
05-09-2019, 04:41 PM
|
#13 |
|
Join Date: Apr 2019
Posts: 4
|
I ordered this PWK24 flat slide clone on Amazon and a kit of Chinese Keihin jets for it. Works perfect with no extra throttle cable
Chinese PWK24 Clone You need to purchase an intake or adapter separately which makes it a little more expensive than the VM copies everyone uses - but I guess thats offset a little if you have to but a throttle to use the VM This Jet Kit This intake/adapter This UNI filter Food for thought |
|
|
|
|
|
 |
|
|
Linear Mode
