Apollo motors commander 110 need help

Dpwiding79 · 12-29-2018, 06:03 PM

I went to change the oil and took wrong plug off
Guessing has something to do with clutch a rod
And spring came out I have not moved ATV since
came out my question is how does it go back spring
First then rod ? Any help would be greatly appreciated

Bruces · 12-29-2018, 06:15 PM

We need a few pictures ,General engine from the side and a picture of what you took apart .

dirtbkr188 · 12-29-2018, 09:13 PM

The rod goes in first, if there is a plastic tip on the rod, that end goes in first. Followed by the spring, and then the plug is last. That is the cam chain tensioner rod and spring.

dirtbkr188 · 12-29-2018, 09:44 PM

Lower left side of the engine, the plug is at an angle...

12-29-2018, 06:03 PM	#1
Dpwiding79 Join Date: Dec 2018 Posts: 1	Apollo motors commander 110 need help I went to change the oil and took wrong plug off Guessing has something to do with clutch a rod And spring came out I have not moved ATV since came out my question is how does it go back spring First then rod ? Any help would be greatly appreciated
	0

12-29-2018, 09:44 PM	#4
dirtbkr188 Join Date: Aug 2009 Posts: 574	Lower left side of the engine, the plug is at an angle... Last edited by dirtbkr188; 12-30-2018 at 07:15 PM. Reason: original pic was too big
	0

12-29-2018, 06:15 PM	#2
Bruces Join Date: May 2018 Posts: 1,650	We need a few pictures ,General engine from the side and a picture of what you took apart .
	0

12-29-2018, 09:13 PM	#3
dirtbkr188 Join Date: Aug 2009 Posts: 574	The rod goes in first, if there is a plastic tip on the rod, that end goes in first. Followed by the spring, and then the plug is last. That is the cam chain tensioner rod and spring.
	1