10-30-2018, 06:24 PM | #16 |
Join Date: Aug 2018
Posts: 286
|
Kinda same issue I had. I read on here I think or could have been on google if the a/f screw needs 3 turns or more out to go up 1 size jet and if its 1 turn or less to go down 1 size. I think most of my issues I had were self inflicted, I just had to have a bigger carb and just had to have a better exhaust. After I got it going good I stayed close to home for a while, just in case but now I ride it all over. I do carry a few tools with me though as you never know.
__________________
2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks |
|
11-01-2018, 11:55 PM | #17 | |
Join Date: Oct 2018
Posts: 38
|
Quote:
I put the carb on today, but what did you do with the tube coming off the crankshaft? |
|
|
11-02-2018, 01:49 AM | #18 |
Join Date: Aug 2018
Posts: 286
|
The larger hose comming out of the crankcase I put a small air filter on it, that's the crankcase breather. You don't need to drill a hole in the intake tube as I did, it just gets plugged. I think that's all the vac lines I have. I took the EGR off and covered the port with the bracket that mounts the EGR tube onto the head. I took all the emissions stuff off. You can just leave the crankcase hose with nothing on it as well.
__________________
2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks Last edited by Whisky; 11-02-2018 at 03:48 AM. |
|
11-02-2018, 05:41 AM | #19 |
Join Date: Oct 2018
Posts: 38
|
Thank you
|
|
11-04-2018, 01:54 AM | #20 |
Join Date: Oct 2018
Posts: 38
|
Did you use the stock carburetor throttle cap on the new carb or did you use the one it came with. I don't think mine is seated completely and I'm using the stock cap on the new carb.
|
|
11-04-2018, 10:28 AM | #21 |
Join Date: Aug 2018
Posts: 286
|
Im using the one that came with the new carb but replaced the 90* bend cable guide with the straight one. I can almost guarantee u have a vac leak or the choke is on.
__________________
2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks |
|
|
|
|
|