07-20-2018, 12:01 PM | #1 |
Join Date: May 2018
Posts: 41
|
Remove cat from TT 250?
There have been posts talking about removing the cat on the Hawk and/or TT250. Forgive my ignorance, but why do I want to do this? Will I really see more power, smoother idle, etc.. If I remove the catalytic convertor from my muffler, will I need to do anything else? Re-jet the carburetor, etc??? Your thoughts greatly appreciated!
|
|
07-20-2018, 01:24 PM | #2 |
Join Date: Jul 2018
Posts: 212
|
The catalytic converters are restrictive and get jammed up eventually...they rob power from your Hawk/TT250 and cause the engine to run hotter. The same is true for the carb - Hawks have #98 main jets stock/OEM, which causes the engine to run leaner and hotter. Changing the main jet to a #110 and opening up the exhaust (with an appropriate aftermarket exhaust) will both improve performance and allow the engine to run cooler/breathe easier. The TT250 I believe has a larger main jet and slightly less restrictive exhaust so it should be better to run stock vs. the Hawk.
__________________
2018 RPS Hawk 250cc Mods so far: 1. Mikuni VM26 Carburetor w/#115 main jet 2. 17T/45T JT sprockets 3. JT 428 X-ring chain 4. Air box mod 5. Hawk Digital Cluster 6. Aftermarket IMS shift lever 7. Performance Aftermarket Exhaust 8. 295mm Nitrogen Gas Monoshock, 20W oil front forks |
|
07-20-2018, 06:15 PM | #3 |
Join Date: Sep 2017
Location: N Texas
Posts: 706
|
When I changed the exhaust and from a #110 to a #120 jet. I found my bike did have more power. It is not like a kick in the pants faster but my bike revved quicker and runs smoother.
Chris got it right about running cooler too. I assume the motor is cooler but the exhaust is significantly cooler. Don;t forget the big bonus. It sounds GREAT! |
|
|
|
|
|