09-10-2015, 11:18 PM | #1 |
Join Date: Jul 2015
Location: Raleigh, NC
Posts: 11
|
2016 Cleveland Cyclewerks Gen II Misfit
__________________
all I remember is dirt...sky...dirt...ambulance |
|
09-11-2015, 10:58 AM | #2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Interesting assortment of parts. Several different styles going on, but it all seems to fit together nicely. I like the Guzzi-esque side covers.
I hope it's available in other colours.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
09-12-2015, 01:49 PM | #3 |
Join Date: Jul 2015
Location: Raleigh, NC
Posts: 11
|
I know it's also available in black, and IIRRC, custom colors (as well as accessories) can be ordered.
__________________
all I remember is dirt...sky...dirt...ambulance |
|
09-15-2015, 07:56 AM | #4 |
Join Date: Feb 2007
Posts: 1,357
|
I see they claim 70 MPH from the 250cc (229cc) engine!
|
|
09-18-2015, 07:18 PM | #5 |
Join Date: May 2015
Location: Houston area
Posts: 1,902
|
Tail Fairing - Check. Tank with knee indents - Check. Clip-on bars - nope. Its still a custom-looking affordable bike.
__________________
"Its not WHAT you ride; its THAT you ride" |
|
05-25-2018, 05:06 AM | #6 |
Join Date: May 2018
Posts: 43
|
I did like the first gen Misfit but the price a bit steep.
I might be wrong but I heard the CPI XR250 sells for a fraction in China, which Misfit was based on. http://www.cpi-motor.com.tw/eng/xr.htm |
|
05-27-2018, 05:15 PM | #7 |
Join Date: May 2015
Location: Houston area
Posts: 1,902
|
What speed parts are available for the Gen II? Will speed parts for the Hawk dual sport work on the Gen II?
__________________
"Its not WHAT you ride; its THAT you ride" |
|
05-27-2018, 08:33 PM | #8 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,054
|
My guess would be one of the aftermarket carbs that fit on the Hawk would be one mod, since the 229 or 223cc (or whatever exact size different companies make their engines) are very similar. Also, gearing--my guess is the countersprocket on the CCW is an old Honda part like the countersprocket on the Hawk is.
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
05-28-2018, 03:01 AM | #9 | |
Join Date: May 2018
Posts: 43
|
Quote:
they have a file here: https://clevelandcyclewerks.com/misfit-details-gen-ii/ and here's the spec sheet: https://1drv.ms/b/s!AoEJtwNSOSpzglYJBP-ipiPoBjqu |
|
|
05-28-2018, 03:04 AM | #10 | |
Join Date: May 2018
Posts: 43
|
Quote:
Here are parts for 1st gen.. I am guessing these parts will fit the 2nd gen without too much problem https://clevelandspeedshop.com/collections/misfit-gen-i |
|
|
05-28-2018, 10:02 PM | #11 |
Join Date: May 2015
Location: Houston area
Posts: 1,902
|
A 4hp increase does not sound impressive, but it is a 33% gain in horsepower for under a grand, with the new exhaust, head and rejetting (if you return your stock head to CCW).
-It will not keep up with a CSC RX3, but it is still significantly less expensive, even after adding $800 in speed parts.
__________________
"Its not WHAT you ride; its THAT you ride" |
|
05-29-2018, 12:47 AM | #12 | |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,054
|
Quote:
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
|
05-29-2018, 12:50 AM | #13 | |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,054
|
Quote:
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
|
05-29-2018, 03:28 AM | #14 | |
Join Date: May 2018
Posts: 43
|
Quote:
https://clevelandspeedshop.com/colle...ton-gasket-kit |
|
|
|
|
|
|