09-29-2017, 07:52 AM | #2 |
Join Date: Dec 2016
Location: New Jersey
Posts: 86
|
Sticky this. Nice video dude.
__________________
2016 Coolster 3150-DX2 |
|
09-29-2017, 12:04 PM | #3 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Excellent vid.
I have two recommendations. First, use moly grease on brake parts, rather than axle grease. Second, when you have the brake shoes off of the backing plate, take the time to make an index punch to show the relationship of the lever to the camshaft and then remove the lever. This allows you to remove the cam and apply a little moly to it for long life. If you don't lubricate the cam, it will create a sloppy hole in the backing plate over time.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
|