08-30-2015, 11:55 AM | #1 |
Join Date: Aug 2015
Location: Connersville, Indiana
Posts: 7
|
2008 Hanma GY200 exhaust question
I'm trying to locate exhaust parts for this bike. My bike is like this https://www.flickr.com/photos/826602...n/photostream/. Most of what I'm finding is discontinued or out of stock. What options do I have?
|
|
08-30-2015, 11:59 AM | #2 |
Join Date: Aug 2015
Location: Connersville, Indiana
Posts: 7
|
Just wanted to add my engine is the 163fml.
|
|
08-30-2015, 12:36 PM | #3 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
An early XR200 exhaust might be close.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
08-30-2015, 01:53 PM | #4 |
Join Date: Aug 2015
Location: Connersville, Indiana
Posts: 7
|
Okay, I'll give that a try. Thanks for the help. |
|
08-30-2015, 02:01 PM | #5 |
Join Date: Aug 2015
Location: Connersville, Indiana
Posts: 7
|
Weldandgrind do you think 87-02 would work?
|
|
08-30-2015, 08:51 PM | #6 |
Join Date: Aug 2015
Location: Michigan
Posts: 199
|
xr200 exhuast diameter 33mm if you cant find one of those pretty sure crf230 would work
|
|
08-31-2015, 11:09 AM | #7 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I think the header will physically bolt on, but the curve of the header might not clear the frame at the right section. I recommend researching pics online to get a sense of what you need, vs. an XR200.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
|