![]() |
#16 |
my bike has 17/46 and does 50 at 7k. better than the stock witch was 40 at 7k.
__________________
it takes the insane to keep the world sane Future 2015 csc rx3 |
|
![]() |
![]() |
#17 |
Join Date: Nov 2006
Location: Ft. Myers, Fl.
Posts: 416
|
i have a 17/42 and low speeds pretty much suck on the trails but it just gives an excuse to to go faster. i did drop my bike last though cause i was trying to go slow and it stalled out. i broke the side cover. but if i need to climb a hill that is dirt i just rev the shit outta it and drop the clutch. i should take some video of the little hill i go over about 3 times a week by my house.
btw i can only get my bike to go about 65mph top speed. this seems a bit slow considering the gearing i have.
__________________
Roketa DB-07a HID Headlight |
![]() |
![]() |
#18 |
Join Date: Apr 2007
Location: Toronto Ontario Canada
Posts: 2,585
|
I have 15/46, 150cc, cruise at 30mph.
------------------------------------------- That was before engine was broken in, and I was babying it. More like 75 to 80 Kph. I think that's 50?mph? Pinned is 90Kph wind makes huge difference. Same sprocket. |
![]() |
![]() |
#19 |
Join Date: Feb 2007
Posts: 6
|
hondou gy200
17 front, 45 rear topped out @80mph last week on good downhill section of road regularly hit 70mph on the flat roads revs... don't know. rgds, |
![]() |
![]() |
#20 |
Join Date: May 2006
Location: Fredericton, NB, Canada
Posts: 1,744
|
17/46
~7500rpm at 100kph. It will do about 110kph but its not fun. My bike is a 2005 Lifan LF200GY-2. I'm 6'3" and weigh about 210lbs
__________________
Frostbite "The beatings will continue until moral improves" |
![]() |
![]() |
#21 |
Join Date: Mar 2007
Location: Comox Valley, British Columbia
Posts: 49
|
I will put all these different sizings together along with bike type and create a list for you guys to look at... Keep 'em coming guys!!
__________________
Dan Gagne Ridgeline Rod & Reels |
![]() |
![]() |
#22 |
Join Date: Mar 2007
Location: Comox Valley, British Columbia
Posts: 49
|
Here is the update so far, waiting for more....
------------------- F / R --------------------- 1a) Lifan GY-5- 17/42 60mph/5500rpm 1b) Lifan GY-5 - 17/46 60mph/6500rpm 2) Lifan GY-2- 17/46 60mph/7000rpm 3) Roketa- 14/46 55mph/6500rpm 4) Newstar- 16/38 50mph/5000rpm *4spd. 5) Hongdou- 17/42 60mph/5000rpm *250cc 6a) Viva- 17/46 50mph/7000rpm 6b) Viva- 17/44 60mph/7250rpm If you have any discrepencies towards these numbers let me know...
__________________
Dan Gagne Ridgeline Rod & Reels |
![]() |
![]() |
#23 |
Join Date: Apr 2007
Location: Toronto Ontario Canada
Posts: 2,585
|
Oh well, I don't make the poll. :(
|
![]() |
![]() |
#24 |
Join Date: Mar 2007
Location: Comox Valley, British Columbia
Posts: 49
|
Give me your rpm's and it will be in there, that is why it's not put up :wink:
__________________
Dan Gagne Ridgeline Rod & Reels |
![]() |
![]() |
#25 |
Join Date: Apr 2007
Location: Toronto Ontario Canada
Posts: 2,585
|
I ain't gots no fancy tacky-o-meter. :?
|
![]() |
![]() |
#26 |
Join Date: Feb 2007
Location: West Virginia
Posts: 1,194
|
My Viva VX200SX uses a 12T front sprocket and a 35T rear sprocket. I can cruise at 60mph at 7000rpm.
__________________
2013 Jeep Wrangler Sahara MOAB 2005 BMW E53 X5 2011 Schutt Industries LTT-HC LQG trailer 2017 Coleman CT200U 1978 Yamaha SR500E 1979 Yamaha XS650 Special II |
![]() |
|
![]() |
![]() |
|
|