07-02-2011, 11:51 AM | #16 | |
Join Date: Aug 2006
Posts: 254
|
Quote:
There will be a septick tank hookup.
__________________
Lifan QP 100cc Gy Tank 200 GY 2007 Honda XR 650L 2007 DR 650 1973 Yamaha TX 650 |
|
|
07-02-2011, 11:56 AM | #17 | |
Join Date: Aug 2006
Posts: 254
|
Quote:
Tiny power bills, a very small wall mounted propane heater, propane stove.
__________________
Lifan QP 100cc Gy Tank 200 GY 2007 Honda XR 650L 2007 DR 650 1973 Yamaha TX 650 |
|
|
07-17-2011, 09:52 PM | #18 |
Join Date: Aug 2006
Posts: 254
|
Hey guys! I just got back from spending a week off trying to finish off the cabin. Came close, but still have about four full days of work to go on it. Here are some pics of the weeks progress. The living room/kitchen was mostly done, looking like this
[/img] The bedroom/ bathroom needed insulation and wall boards here is the bathroom with one wall lot of the corner boards had to be trimmed, yours truly on my table saw [/img] OSHA never heard of this one, a buddy found it in an old house he bought. Weird sized blade, had to do some work to get a modern blade to fit. Have no idea how old it is, but works fine for small stuff like trim walls going up in the living room Had to trim the windows ceiling going up I was going to leave the water heater in the kitchen, decided to move it to the bathroom and build a cabinet over it The counter over the water heater is the same as the kitchen cabinet. We bought a kitchen sink and huge countertop off craigs list. Cut off parts will be the bathroom counter top, a corner kitchen counter top and probably a night stand. The water heater cabinet goes well with this porcelan corner sink we found. The shower needs work, it froze to the ground outside and cracked. My uncle swears he will have it like new with bondo and epoxy. We'll see, it was also priced right, free!! Here is a pic of the bedroom. The walls are sealed, just have to do the trim a picture from the bedroom showing the kitchen, bathroom doors. Another picture of the kitchen cabinet, I liked how they came out. Just have to do floor covering, hang two more doors and the back wall outside and my little mountain cabin will be done.
__________________
Lifan QP 100cc Gy Tank 200 GY 2007 Honda XR 650L 2007 DR 650 1973 Yamaha TX 650 |
|
07-17-2011, 10:05 PM | #19 |
Join Date: Oct 2009
Location: Alberta, Canada
Posts: 3,274
|
Dang! That looks sweet Gene! Seriously, I could live there too... Are you taking in boarders yet?
Cheers, Stew |
|
07-17-2011, 10:16 PM | #20 |
Join Date: Oct 2009
Location: Alberta, Canada
Posts: 3,274
|
Oh, I was going to ask too, do you run a well and pressure system or a cistern? Not sure if you mentioned it before, I might have missed it. A lot of acerage owners here use the cistern system now due to the price of getting a well drilled... $$$!
|
|
07-17-2011, 11:34 PM | #21 |
Join Date: Aug 2006
Posts: 254
|
It is family land. We hold family reunions there. Started off with a few rv spots, then a couple aunts built some one room cabins there.
We had been dragging our rv up there but decided to build a small cabin. We bought cheap wood for a year and decided we could build something a little better. We hooked into the pump that is on-site and will have our own septic. We pay a lot rent for putting the cabin there. I just wanted to see if we could do it. Would like to eventually build another just like it on our own land somewhere. With careful shopping, a lot of craigs list finds I have not spent a whole lot of money, less than 5k. That's what amazes me, I will have built a house I could live in for that. Tools needed, hammers, levels, standard hand tools, tape measures, 16penny air hammer and air finish nailer, table saw, skill saw, mitre saw, jig saw. I built about half of the first room with a hammer and skill saw. Thank god for air guns. The rafters were probably the hardest.
__________________
Lifan QP 100cc Gy Tank 200 GY 2007 Honda XR 650L 2007 DR 650 1973 Yamaha TX 650 |
|
07-18-2011, 02:32 AM | #22 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
You do good work, Gene! Your cabin looks beautiful.
Spud
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
07-18-2011, 11:11 AM | #23 | |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Quote:
Does that old tablesaw happen to say Rockwell on it?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
07-18-2011, 02:29 PM | #24 |
Join Date: Feb 2007
Posts: 1,357
|
deputygene,
Nice job on your cabin. Don't feel bad about taking a lot longer than you planned. When I rebuilt and expanded a cracker house at our ranch in Florida, I said I was going to be done by Christmas. I was off by one year and got it completed by the next Christmas. |
|
07-18-2011, 03:20 PM | #25 | ||
Join Date: Aug 2006
Posts: 254
|
Quote:
__________________
Lifan QP 100cc Gy Tank 200 GY 2007 Honda XR 650L 2007 DR 650 1973 Yamaha TX 650 |
||
|
07-18-2011, 03:27 PM | #26 | |
Join Date: Aug 2006
Posts: 254
|
Quote:
We decided last July to build it with a goal to be done by the end of July this year. We won't be done, but we hope to get the floor coverings down (lenolium) down next weekend and stay in it for this years reunion.
__________________
Lifan QP 100cc Gy Tank 200 GY 2007 Honda XR 650L 2007 DR 650 1973 Yamaha TX 650 |
|
|
10-13-2011, 01:08 PM | #27 |
Join Date: Aug 2006
Posts: 254
|
A few more pics
My sister Linda, who lives in the midwest, has been following my cabin build and wanted to come see it. her husband Randy likes to ride, and it was decided that they would truck their bike down on a fri, and we would spend sat riding the Blue ridge parkway. Here is Randy and Linda on their bike
Me and Roxanne also trucked our bikes in, we had a bunch of stuff to take with us to the cabin. We had made some improvements to the cabin, including a great looking vinyl flooring we scored off craigslist for the kitchen Wood laminate flooring for the bathroom Opened up the water heater cabinet for a little storage Hooked up the water [/img] shower came out ok We put down a wood laminate flooring in the batroom An extra piece of kitchen countertop became a nightstand Im going to put a lock on the door The couches are both sleepers The cabin was comfortable for the weekend We were going to build a closet but found this Armoir at a yardsale Guy gave us this little desk with the armoir. It was a chilly weekend, but this small electric heater kept the cabin comfy I still have one piece of kitchen countertop left. It is going to become a corner hutch to put the microwave on [/img] Sat dawned bright, clear and a little chilly. Our destination was Mabry Mill on the Blue Ridge Parkway. But first, a gas stop for the bikes. Then onto the parkway. Stopped at one of the many overlooks where a Beamer rider took all of our pics Mabry Mill was really crowded. This is an earlier pic They were cooking apples for apple butter and sugar cane. The water sloughs had gold dust in the sloughs Linda and Randy at Mabry Mill Mabry Mill was around 120 miles since the fill up that morning. We pushed back to Fancy Gap for gas. I had put Roxannes DR on reserve at Mabry Mill and was hoping it would make it. About 138 miles total, her bike held 3 gallons when we filled up. Total capacity is 3.4 gallons. We ate at Lakeview restraunt. It is one of our favorites, In operation since the 30's. Sorry no pics. We stopped off at one last overlook for the view The XR ran fine with the new pipe and jetting, although I suspect it is running rich. About 260 mile round trip, the parkway was filled with bikes and cars.
__________________
Lifan QP 100cc Gy Tank 200 GY 2007 Honda XR 650L 2007 DR 650 1973 Yamaha TX 650 |
|
10-14-2011, 08:27 AM | #28 |
Join Date: Oct 2009
Location: Alberta, Canada
Posts: 3,274
|
Awesome pics! The cabin looks fantastic, I'm sure you guys will get a lot of enjoyment out of it . Very nice bike ride as well!
|
|
10-14-2011, 10:21 AM | #29 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
The BRP is on my bucket list.
The cabin looks great! Thanks for the pics.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
10-14-2011, 11:30 AM | #30 |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
Great pics. Love the cabin. Thanks for taking the time to share.
__________________
Happy to serve. |
|
|
|
|
|