05-07-2011, 03:53 PM
|
#1 |
|
Join Date: Mar 2011
Posts: 34
|
Show off ur beast
I dont even know if i can post this here but lets see everyones beast, how far they have come, and any modds you have done. A pictures worth a million words. .......ill post mine tonight after i make a new photobook account
|
|
|
05-08-2011, 09:56 AM
|
#2 |
|
Join Date: Aug 2009
Location: London, Ontario
Posts: 1,097
|
Well i don't have a good pic, but here's a short video of mine
On my beast i have done the performace CDI, Mikuni upgrade carb w/ 110 Main jet and 25 pilot jet and a UNI air filter, i also replace the battery with a 12AH one from Canadian Tire and relocated it to the left rear to allow more room for the air filter, DID chain, yamaha rear swingarm bushings, performance front shocks, i have the rear performance shock but have not installed it yet, NGK DR8ES-L spark plug, Beast performance exhaust ( i changed the muffler to the Monster one though) and added the grease nipple to the rear axle carrier tube. |
|
|
|
05-20-2011, 02:57 PM
|
#4 |
|
Join Date: Mar 2011
Posts: 34
|
i thought id share some pics of the LE beast. some things are different than the normal beast..............................
   that filter above the carb was actually under it, but kept getting wet. i believe the swingarm is also a new design
|
|
|
|
05-20-2011, 09:26 PM
|
#5 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Honda clone elliptical housing. Sweet.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
05-21-2011, 01:51 PM
|
#7 |
|
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
That's ok. I'll delete 'em as I find 'em.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
|
 |
|
|
Linear Mode
