ChinaRiders Forums

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   Street (http://www.chinariders.net/forumdisplay.php?f=104)
-   -   My TaoTao Hellcat 125cc (http://www.chinariders.net/showthread.php?t=20961)

Lucastheking 09-20-2018 09:04 PM

Quote:

Originally Posted by Chinabike (Post 290960)
Its the hose that comes out of the top of the engine. Its connected to the emissions/air box.
If you remove air box then you put the uni filter on the end of the hose that was connected to the air box.

Would take a pic for you but i'm not around my bike.

OOOHH its when it remove the airbox? thanks man i havent done that yet cause i still have the stock carb on ill do it when i change the carb then, thanks man

Chinabike 09-21-2018 06:56 PM

Quote:

Originally Posted by Lucastheking (Post 291026)
OOOHH its when it remove the airbox? thanks man i havent done that yet cause i still have the stock carb on ill do it when i change the carb then, thanks man

yes only when you remove the air box, then you will have the filter on the the crank case hose.

Chinabike 09-30-2018 06:47 PM

Help!

I can't get me rpms higher then 6-7k topping out speed 50mph wot.
After moving from a 105 main jet to a 95 main jet. Needle clip middle.
vm22 carb

when i had a 110 main jet in it would get 58mph but would bog at 3/4 throttle

Whats should i try, think i'll try back up main jet

wlfpck 10-02-2018 01:41 PM

Where are you located? I'm running a 110 or 115 main.

Have you done a plug chop to see if you're lean or rich? That's probably where I'd start.

Chinabike 10-05-2018 07:11 PM

Quote:

Originally Posted by wlfpck (Post 291694)
Where are you located? I'm running a 110 or 115 main.

Have you done a plug chop to see if you're lean or rich? That's probably where I'd start.


cali, yeah i was running rich at #115 #110. #105 was still a little on the rich side.
I'm running good now at #100 still need to run it some more. I think changing my pod filter mess up my tuning.

Gman828 10-15-2018 03:33 PM

Guys, had my TaoTao on the road for about 2 weeks and it has started no idling. Any idea what may be going on? Made a video to show what it was doing but can’t figure out how to upload it.

Whisky 10-15-2018 06:43 PM

I found out that fine tuning the idle is best where the throttle is mounted on the handle bars. After u get it smooth there then set it on the carb. I fought a high/low/no idle for days.

Chinabike 10-16-2018 06:28 PM

Quote:

Originally Posted by Gman828 (Post 292525)
Guys, had my TaoTao on the road for about 2 weeks and it has started no idling. Any idea what may be going on? Made a video to show what it was doing but can’t figure out how to upload it.

No idle? You check the plug? rich/lean.
Upload the video to youtube and post the link.

wlfpck 10-29-2018 12:04 PM

Quote:

Originally Posted by Gman828 (Post 292525)
Guys, had my TaoTao on the road for about 2 weeks and it has started no idling. Any idea what may be going on? Made a video to show what it was doing but can’t figure out how to upload it.

Open the carb up and check the pilot jet. If it's clogged, could be an issue.

Throw the video on youtube and post the link.


All times are GMT -4. The time now is 11:27 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.