2007 Lifan 50 Ignition hook up

turbowrenchhead · 04-14-2022, 10:40 AM

I picked up this bike real cheap. The stator was missing. I found a complete ignition system on ebay and a make shift diagram of how to hook up the wires. When I got into it. None of the wires were the same color as their diagram. I have tried multiple combinations and I still can't get spark. Its a 5 wire cdi with just a kill switch, no ignition switch or and lights.

Falkon45 · 04-14-2022, 01:56 PM

I have a similar kit. Match up all the wires that are the same color on the main harness and stator. You should have extra wires left over. Those extra wires will be for the battery, lights, rectifier. If your bike is electric start, or has lights, you'll have to use the existing wiring on your bike, and get them to connect to the stator wires. That looks like the kick start only harness.

It might be kinda hard to see, but here's a picture of my harness from the stator to main, with extras leftover.

04-14-2022, 01:56 PM	#2
Falkon45 Join Date: Aug 2020 Location: Savannah, Ga Posts: 759	I have a similar kit. Match up all the wires that are the same color on the main harness and stator. You should have extra wires left over. Those extra wires will be for the battery, lights, rectifier. If your bike is electric start, or has lights, you'll have to use the existing wiring on your bike, and get them to connect to the stator wires. That looks like the kick start only harness. It might be kinda hard to see, but here's a picture of my harness from the stator to main, with extras leftover.
	0