02-08-2022, 07:57 PM
|
#1 |
|
Join Date: Mar 2021
Posts: 40
|
Fuel gauge sender upgrade super trivia
I know it’s unmanly and OCD to worry about the accuracy of the gas gauge but it’s driving me crazy and my therapist says it’s ok for me to try fix it
 . I have an idea of cutting the float rod and crimping in a section of aluminum tubing to extend the length. Anyone know how much longer I need to make it? Would lengthening the float rod screw up the calibration of the sending unit? The TT 250 sending unit costs $35 with shipping!! I’m way too cheap to go that route! |
|
|
02-08-2022, 08:14 PM
|
#2 |
|
Join Date: Dec 2019
Posts: 77
|
I rebent my stock float using known amount of fuel to check accuracy. Took me a few tries to get it right but reads very accurate now. Digital dash stopped the bouncing of the analog gauge too.
|
|
|
|
02-09-2022, 07:52 AM
|
#3 |
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,568
|
I replaced mind on my Hawk with this one. it was more accurate than stock. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
|
|
 |
|
|
Linear Mode
