11-11-2020, 08:09 AM
|
#1 |
|
Join Date: Oct 2020
Posts: 4
|
250rx help
Just got a 250 RX I have a Mikuni carburetor my question is what are people running for the Jets I live in Central Florida so elevation isn’t really that big and does anybody have a starting point on adjustments thank you very much
|
|
|
12-10-2020, 10:42 PM
|
#2 |
|
Join Date: Nov 2020
Posts: 21
|
Jeez this is my 3rd time trying to reply, idk why my post keeps cutting.
I have the 250rx offroad version. Just put in a mikuni clone. Suggested stating point is: 25 pilot jet, 115 main jet, needle jet pin at 3rd notch from top, air/fuel screw 1.5 turns out. I did this and the bike started right up. i'm at 1020ft elevation. then turn the screw in half point increments when tunning. See my earlier thread for more info --> http://www.chinariders.net/showthrea...ight=firstbike |
|
|
|
|
|
 |
|
|
Linear Mode
