Hello from Buffalo

bellinbuffalo · 02-21-2008, 08:39 AM

Hi everyone
I'm from Buffalo NY and just got delivery of two Lifan 200 street bikes
My daughter wanted to learn and I haven't had a bike for a couple of years so we decided to try these (price)
one of the bikes arrived in perfect condition the other not so perfect
anyway I got them put together and they started right up
nuts and bolts started to rattle off and hit the floor so I guess I will be busy with the Lock-Tight for a while
it's about 10 degrees in Buffalo so I am hoping for a break in the weather soon
any other New Yorkers out there?
looking forward to sharing information and stories

katoranger · 02-21-2008, 09:02 AM

Welcome to the forum. Look in the dual sport forum at the bike prep checklist. It applies to street bikes too.

Go out and buy the BIG tube of loktite and check ALL the bolts.

Also check the wiring for possible pinch points.

Allen

culcune · 02-21-2008, 09:11 AM

Welcome. There is a dealer from near you, I think on the Canadian side of the border?

AZ200cc · 02-21-2008, 01:36 PM

Welcome aboard

liverchip · 02-21-2008, 07:46 PM

Welcome and remember Loc-tite is your friend!

BIGHIRT · 02-22-2008, 09:33 AM

WELCOME

Lifanrider · 02-22-2008, 09:49 AM

Hey, welcome aboard. Hope you and your kid have a blast. Just be careful and take your time until you get your bikelegs back.

ejcycles · 02-23-2008, 09:29 AM

Hi bellinbuffalo

Welcome to ChinaRiders!!!

IronFist · 02-28-2008, 12:04 PM

I'm in toronto! Buffalo ain't too far away

I plan to do niagra falls this year. Do you have anything against riding with a honda? 8O

kczukiman · 02-28-2008, 03:35 PM

Hello and welcome from Missouri.

kpinvt · 03-07-2008, 01:59 AM

Quote:

Originally Posted by bellinbuffalo

Hi everyone...

<snip>

...nuts and bolts started to rattle off and hit the floor so I guess I will be busy with the Lock-Tight for a while

I just read on another forum to keep the Loc-tite away from bolts holding plastic body parts on a bike. It seems this stuff will eat the plastic to the point that the panel will fall off the bike.

02-21-2008, 08:39 AM	#1
bellinbuffalo Join Date: Feb 2008 Location: Buffalo NY Posts: 7	Hello from Buffalo Hi everyone I'm from Buffalo NY and just got delivery of two Lifan 200 street bikes My daughter wanted to learn and I haven't had a bike for a couple of years so we decided to try these (price) one of the bikes arrived in perfect condition the other not so perfect anyway I got them put together and they started right up nuts and bolts started to rattle off and hit the floor so I guess I will be busy with the Lock-Tight for a while it's about 10 degrees in Buffalo so I am hoping for a break in the weather soon any other New Yorkers out there? looking forward to sharing information and stories
	0

02-21-2008, 09:02 AM	#2
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Welcome to the forum. Look in the dual sport forum at the bike prep checklist. It applies to street bikes too. Go out and buy the BIG tube of loktite and check ALL the bolts. Also check the wiring for possible pinch points. Allen __________________ You meet the nicest people on a Honda Clone.
	0

02-21-2008, 09:11 AM	#3
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,035	Welcome. There is a dealer from near you, I think on the Canadian side of the border? __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

02-21-2008, 01:36 PM	#4
AZ200cc Join Date: Apr 2007 Location: Show Low Arizona Posts: 2,889	Welcome aboard __________________ <br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90
	0

02-21-2008, 07:46 PM	#5
liverchip Join Date: Nov 2006 Location: Mystery Spot Posts: 1,223	Welcome and remember Loc-tite is your friend! __________________ 2009 XR650L Big Red Pig Tusk bar risers 2007 X-Moto(Jetmoto) GY250 --mods--- 15/40 sprockets UNI Pod Filter 2007 Shineray TMS 200XYi--Betsy Betsy Mods:______________________ Acerbis DHH headlight FMF Powercore pipe Uni Pod Filter
	0

02-22-2008, 09:33 AM	#6
BIGHIRT Join Date: Feb 2008 Location: Duncannon,Pa Posts: 34	WELCOME
	0

02-22-2008, 09:49 AM	#7
Lifanrider Join Date: Feb 2008 Posts: 96	Hey, welcome aboard. Hope you and your kid have a blast. Just be careful and take your time until you get your bikelegs back. __________________ 2007 Lifan GY-5
	0

02-23-2008, 09:29 AM	#8
ejcycles Join Date: Oct 2006 Location: 11481 State Route 44 Mantua, Ohio 44255 Posts: 1,112	Hi bellinbuffalo Welcome to ChinaRiders!!! __________________ Thanks, Bruce @ Endless Journey Cycles "Phone Calls Only" ~330-274-0098~ Hours: Tue.-Fri. 10:00-6:00 Sat. 10:00-4:00 EST. Dealer for: Lifan, Crossrunner ATVs. http://www.endlessjourneycycles.net
	0

02-28-2008, 12:04 PM	#9
IronFist Join Date: Apr 2007 Location: Toronto Ontario Canada Posts: 2,585	I'm in toronto! Buffalo ain't too far away I plan to do niagra falls this year. Do you have anything against riding with a honda? 8O __________________ IronFist ___________________________________ The "chain" of command is used for beating spammers. ___________________________________
	0

02-28-2008, 03:35 PM	#10
kczukiman Join Date: Jul 2007 Location: Independence,Missouri Posts: 1,049	Hello and welcome from Missouri.
	0