Hawk a little less green.

pcspecialist · 08-05-2016, 07:58 PM

I liked how the TT250 extended the tank color into the side panels some so I did the same on my Hawk. The only reason they would make the side panel two piece is because they were meant to be two color.

Right "side cap" from CSC: http://www.cscmotorcycles.com/TT250-...p/zt30-109.htm

Before photo:

Left "side cap" from CSC: http://www.cscmotorcycles.com/TT250-...p/zt30-103.htm

More photos can be found on my Facebook timeline:
https://www.facebook.com/pnwphotogra...846.1349642813

hertz9753 · 08-05-2016, 09:39 PM

I like it but you need to pull those fork boots up the bottom fork clamp. Is that red on swing arm reflective?

pcspecialist · 08-05-2016, 10:36 PM

yes, the red tape on the swingarm and the silver tape on the forks is very reflective. I got it at Harbor Freight Tools.

It is one of these, they appear to be the same:

http://www.harborfreight.com/2-in-x-...-pk-61392.html
http://www.harborfreight.com/10-piec...ape-97562.html

hertz9753 · 08-05-2016, 11:19 PM

I want that shifter for my bike. I also noticed that that shifter is very low and that would put your toes pointing at the ground because it below the frame and the foot peg. I'm just trying help.

pcspecialist · 08-06-2016, 12:33 AM

shifter is exactly where I want it, parallel with the foot peg.

BlackBike · 08-06-2016, 01:01 AM

Good with the reflectors, did the same with my swing arms. Both red silver together on mine. They blaze at nite. Extra safety.

GeneralTso · 08-06-2016, 01:06 AM

Great looking bike man, I look at it every time I start getting frustrated with mine haha. Get's me motivated again.

2LZ · 08-06-2016, 10:36 AM

Man....that's a sharp looking Hawk. Tastefully done, nice contrasting with the blend of black/green.

Where'd you get your canister again? HFT? I'd like to replace the little tool kit on Mrs. 2LZ TT but don't want something that stands out too much or is a funny color. That looks perfect. How'd you strap it on?

pcspecialist · 08-06-2016, 03:48 PM

Canister: http://www.ebay.com/itm/111693466254

Thanks to MotoCheez for the idea:

1cylinderwonder · 08-06-2016, 10:53 PM

Quote:

Originally Posted by 2LZ

Where'd you get your canister again? HFT? I'd like to replace the little tool kit on Mrs. 2LZ TT but don't want something that stands out too much or is a funny color. That looks perfect. How'd you strap it on?

You can buy those at Tractor Supply. Most towns have a TSC outlet.

dpl096 · 08-07-2016, 10:39 AM

Sure changed the look of that bike .... well done

pcspecialist · 08-07-2016, 12:05 PM

I wonder why RPS decided to make both pieces the same color instead of extending the tank color into the front portion of the rear side covers?

Weldangrind · 08-07-2016, 12:13 PM

Nice job! Krylon Fusion?

pcspecialist · 08-07-2016, 12:21 PM

No, I posted links to what I used with the photos. Here they are again:
http://www.cscmotorcycles.com/TT250-...p/zt30-109.htm
http://www.cscmotorcycles.com/TT250-...p/zt30-103.htm

Weldangrind · 08-08-2016, 11:27 AM

Thanks, I missed the links. I recommend that you put a space between links and pics, so old guys like me can see them.

08-05-2016, 07:58 PM	#1
pcspecialist Join Date: May 2016 Posts: 583	Hawk a little less green. I liked how the TT250 extended the tank color into the side panels some so I did the same on my Hawk. The only reason they would make the side panel two piece is because they were meant to be two color. Right "side cap" from CSC: http://www.cscmotorcycles.com/TT250-...p/zt30-109.htm Before photo: Left "side cap" from CSC: http://www.cscmotorcycles.com/TT250-...p/zt30-103.htm More photos can be found on my Facebook timeline: https://www.facebook.com/pnwphotogra...846.1349642813 Last edited by pcspecialist; 08-08-2016 at 01:14 PM.
	6

08-05-2016, 09:39 PM	#2
hertz9753 Join Date: May 2016 Location: Bismarck, ND Posts: 868	I like it but you need to pull those fork boots up the bottom fork clamp. Is that red on swing arm reflective? __________________ 2015 and 3/4 RPS Hawk 250. Most people would call it a 2016 but the MCO didn't.
	0

08-05-2016, 10:36 PM	#3
pcspecialist Join Date: May 2016 Posts: 583	yes, the red tape on the swingarm and the silver tape on the forks is very reflective. I got it at Harbor Freight Tools. It is one of these, they appear to be the same: http://www.harborfreight.com/2-in-x-...-pk-61392.html http://www.harborfreight.com/10-piec...ape-97562.html Last edited by pcspecialist; 08-05-2016 at 11:09 PM.
	0

08-05-2016, 11:19 PM	#4
hertz9753 Join Date: May 2016 Location: Bismarck, ND Posts: 868	I want that shifter for my bike. I also noticed that that shifter is very low and that would put your toes pointing at the ground because it below the frame and the foot peg. I'm just trying help. __________________ 2015 and 3/4 RPS Hawk 250. Most people would call it a 2016 but the MCO didn't.
	0

08-06-2016, 01:01 AM	#6
BlackBike Join Date: Feb 2016 Location: George West, Texas Posts: 4,097	Good with the reflectors, did the same with my swing arms. Both red silver together on mine. They blaze at nite. Extra safety. __________________ ***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
	0

08-06-2016, 12:33 AM	#5
pcspecialist Join Date: May 2016 Posts: 583	shifter is exactly where I want it, parallel with the foot peg.
	0

08-06-2016, 01:06 AM	#7
GeneralTso Join Date: May 2016 Location: Middle TN Posts: 312	Great looking bike man, I look at it every time I start getting frustrated with mine haha. Get's me motivated again. __________________ 2005 Kazuma Cheetah 200 (Swamp Thing)
	1

08-06-2016, 10:36 AM	#8
2LZ Join Date: Mar 2010 Location: Volcano, Ca Posts: 7,092	Man....that's a sharp looking Hawk. Tastefully done, nice contrasting with the blend of black/green. Where'd you get your canister again? HFT? I'd like to replace the little tool kit on Mrs. 2LZ TT but don't want something that stands out too much or is a funny color. That looks perfect. How'd you strap it on? __________________ "Light a fire for a man, and you heat him for a day. Light a man on fire, and you heat him for the rest of his life." 2007 Suzuki DRZ400S (SM convert) 2009 Q Link XP 200 1967 BSA B25 250cc Starfire 2022 Royal Enfield Interceptor 650 2023 Royal Enfield Scram 411 1948 Royal Enfield Model G 350
	0

08-06-2016, 03:48 PM	#9
pcspecialist Join Date: May 2016 Posts: 583	Canister: http://www.ebay.com/itm/111693466254 Thanks to MotoCheez for the idea:
	1

08-07-2016, 10:39 AM	#11
dpl096 Join Date: Sep 2015 Location: East Central Hellinois Posts: 1,344	Sure changed the look of that bike .... well done __________________ ************************************************ * " Time you enjoy wasting, is not wasted." - John Lennon “I predict future happiness for Americans, if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.” ― Thomas Jefferson "If you don't know where you're going any road will take you there" ....George Harrison song
	0

08-07-2016, 12:05 PM	#12
pcspecialist Join Date: May 2016 Posts: 583	I wonder why RPS decided to make both pieces the same color instead of extending the tank color into the front portion of the rear side covers?
	0

08-07-2016, 12:13 PM	#13
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Nice job! Krylon Fusion? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

08-07-2016, 12:21 PM	#14
pcspecialist Join Date: May 2016 Posts: 583	No, I posted links to what I used with the photos. Here they are again: http://www.cscmotorcycles.com/TT250-...p/zt30-109.htm http://www.cscmotorcycles.com/TT250-...p/zt30-103.htm
	0

08-08-2016, 11:27 AM	#15
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Thanks, I missed the links. I recommend that you put a space between links and pics, so old guys like me can see them. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	1