Tao hellcat jetting

[Hadaveha]

I have a new hellcat, I bought the suggested 22mm Amazon carb and intake, removed the airbox, turned carb towards the front, Now I’m having a struggle getting my jetting right, Starts right up idles fine, just bogs and dies on take off, Havnt really got her to go enough to get a true reading on the plug. I’ve tried a 90,98, and a105. Main jet. None have worked so far, Any ideas would help. Thankyou

[ripcuda]

I have a VM22 carb on my Hellcat also.


I've been running these settings for the past year:
main = #100
pilot = stock
A/F screw = 1 turn out
needle = top notch (lowest needle setting) with washer


I still feel it's a little lean at idle/mid-range. I feel in addition to the #100 main (I drilled mine out)... I need to open my pilot just a hair too.


Rode it for 20+ miles today... runs good.


Cheers!