09-22-2015, 01:22 PM | #1 |
Join Date: Sep 2015
Posts: 7
|
164 fml???
i have a hi bird 200cc/ the motor says 164 fml. Is that a lifan engine or something else??
|
|
09-22-2015, 02:57 PM | #2 |
Join Date: Sep 2014
Posts: 1,870
|
Probably made by Chongqing Hi-Bird. I haven't seen a 164 FML but all that means is it has a 64mm bore and it's a 200cc class engine.
|
|
09-22-2015, 03:08 PM | #3 |
Join Date: Mar 2015
Location: Spokane, WA
Posts: 253
|
I have an '06 Hi-Bird 200 parts bike... with the 164 fml engine. It's just a typical, ~200cc, overhead valve (OHV) "pushrod" honda-based engine... (no counter balancer). Same type of engine used in many imported china bikes... even Lifan.
Cheers!
__________________
'20 TaoTao Hellcat 125 "grommet" '04 Yamaha TTR-125LE '00 Yamaha TTR-90 '07 Kinroad XT200GY Runmaster (sold) '07 KMD GY6 150cc ATV (sold) '07 Kangchao 250cc ATV Monster (sold) Baja Moto DB-30 "Doodlebugs"(x3) (sold) '06 Hi-Bird 200 parts bike (sold) |
|
09-23-2015, 12:56 AM | #4 |
Join Date: Sep 2015
Posts: 7
|
How do i know if its counterbalanced or not?? Is the cylinder head the same as the 163fml-2. I know of a guy selling one with a bad cylinder head. I seen many on ebay for the 163 but nothing for the 164fml. i guess there not much difference between a 63.5 v 64 bore is, there?
|
|
09-23-2015, 11:18 AM | #5 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
There would be less than 3cc difference between the two bore sizes, assuming the same stroke in each case.
The counterbalanced version has a bulge in the front of the bottom end, below the exhaust pipe header. It matches the width of the bottom end, and it's finned on either side. If you show us a pic of the engine that is for sale, we can point to the counterbalancer and answer your question about the head.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
09-23-2015, 11:13 PM | #6 |
Join Date: Mar 2015
Location: Spokane, WA
Posts: 253
|
If you look at the pic of my Kinroad (link in my signature)... you'll see the finned bulge at the front of the engine case. That's the internal counter-balance. That engine is a 163FML. The engine (non counter-bal) on my HiBird parts bike is a 164FML.
Cheers!
__________________
'20 TaoTao Hellcat 125 "grommet" '04 Yamaha TTR-125LE '00 Yamaha TTR-90 '07 Kinroad XT200GY Runmaster (sold) '07 KMD GY6 150cc ATV (sold) '07 Kangchao 250cc ATV Monster (sold) Baja Moto DB-30 "Doodlebugs"(x3) (sold) '06 Hi-Bird 200 parts bike (sold) |
|
|
|
|
|