04-08-2007, 10:10 PM | #1 |
Join Date: Jan 2007
Posts: 101
|
jets for a lifan 200 gy dual sport
I heard that even if you adjust the carb needle you will still run lean at full throttle.Can you buy jets for these? or what can you do to modify the jet already there.I would like to have this engine running for a while thanks
|
|
04-09-2007, 08:01 AM | #2 |
Join Date: Jan 2007
Location: Northern Vermont, USA
Posts: 1,228
|
Sudco has the jets we need here for the PZ27 on the Roketa: http://www.sudco.com/keihin_mj.html#393
We need type 99101-393-xxx, so 2 jets up would be a 99101-393-112 (019-183). Not sure on the Lifan, but my guess is they are the same. Or, do what I did. Get yourself a set of torch tip cleaners (like little round files) and ream that bad boy out. I went two sizes over and it is just about right. Could have gone 3 and still had good performance and no more white spark plug!!!
__________________
First Chinabike: 2006 Roketa RSX200E Current Chinabikes: 2023 Titan DLX & 2022 Lifan KP Mini w/ 210cc BRT kit, 22 RWHP! |
|
04-09-2007, 08:33 AM | #3 |
Join Date: Oct 2006
Location: 11481 State Route 44 Mantua, Ohio 44255
Posts: 1,112
|
Hunter, Red2003
There is a Main jet picture in my Gallery with all of it's measurements. I have these jets {Keihin Large Round} in stock in various sizes from 90 up. Keihin makes about 10 different main jet sizes in the round style. Bruce
__________________
Thanks, Bruce @ Endless Journey Cycles "Phone Calls Only" ~330-274-0098~ Hours: Tue.-Fri. 10:00-6:00 Sat. 10:00-4:00 EST. Dealer for: Lifan, Crossrunner ATVs. http://www.endlessjourneycycles.net |
|
04-09-2007, 10:11 AM | #4 |
What are the prices on the jets?
__________________
2009 XR650L Big Red Pig Tusk bar risers 2007 X-Moto(Jetmoto) GY250 --mods--- 15/40 sprockets UNI Pod Filter 2007 Shineray TMS 200XYi--Betsy Betsy Mods:______________________ Acerbis DHH headlight FMF Powercore pipe Uni Pod Filter |
|
|
04-09-2007, 11:03 AM | #5 |
Join Date: Oct 2006
Location: 11481 State Route 44 Mantua, Ohio 44255
Posts: 1,112
|
Hi Guys
Jets range anywhere from $3.50 to $7.00 a piece. It depends on the size/diameter of the round jets or if they are hex and the length of the hex. Keihin & Mikuni both use round & hex styled main jets. You will need to open your carburetor to find out what kind main jet you have. Bruce
__________________
Thanks, Bruce @ Endless Journey Cycles "Phone Calls Only" ~330-274-0098~ Hours: Tue.-Fri. 10:00-6:00 Sat. 10:00-4:00 EST. Dealer for: Lifan, Crossrunner ATVs. http://www.endlessjourneycycles.net |
|
|
|
|
|