oil level on a Gio 200cc beast

olryder · 06-09-2009, 10:58 AM

Hi all,

I've just purchased a GIO 200cc Beast. I am just wondering if owners of this ATV have a similar problem as i do.

When i go check my oil with the dipstick, it shows level is full but if i look at the level glass on the motor its not showing any level at all.

Manual said 0.9L of oil, I added about 0.94L just to be safe.

Any help or information regarding which is more accurate would be great.

Thank you.

katoranger · 06-09-2009, 11:03 AM

I believe that you need to thread the dipstick in to check the level. I think you are safe with what you have though.

I just use one quart of oil.

Allen

Weldangrind · 06-09-2009, 11:09 AM

I'm inclined to believe that olryder is already screwing the dipstick in to check the oil, and that is the problem.

olryder, I have a Beast as well, and I found the same thing. I just rest the dipstick on the threads and take a reading from there.

Cheers!

olryder · 06-09-2009, 11:24 AM

so I'm almost at one quart of oil. I did screw it all the way in to check the oil level. Just by resting on the threads i get in between low/high mark.

Do you guys get any level from the level glass at all?

Thanks Weldangrind & katoranger.

katoranger · 06-09-2009, 02:20 PM

Sounds like you are good then. On my bike 1 quart gets me in the sight glass almost to the top.

Allen

suprf1y · 06-09-2009, 02:37 PM

http://www.chinariders.net/modules.p...ewtopic&t=7634

Also, read the sticky at the top of this page.

olryder · 06-09-2009, 03:02 PM

thanks again guys, now i feel more comfortable running it.

06-09-2009, 10:58 AM	#1
olryder Join Date: Jun 2009 Location: Edmonton, AB. Posts: 5	oil level on a Gio 200cc beast Hi all, I've just purchased a GIO 200cc Beast. I am just wondering if owners of this ATV have a similar problem as i do. When i go check my oil with the dipstick, it shows level is full but if i look at the level glass on the motor its not showing any level at all. Manual said 0.9L of oil, I added about 0.94L just to be safe. Any help or information regarding which is more accurate would be great. Thank you.
	0

06-09-2009, 11:03 AM	#2
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	I believe that you need to thread the dipstick in to check the level. I think you are safe with what you have though. I just use one quart of oil. Allen __________________ You meet the nicest people on a Honda Clone.
	0

06-09-2009, 11:09 AM	#3
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I'm inclined to believe that olryder is already screwing the dipstick in to check the oil, and that is the problem. olryder, I have a Beast as well, and I found the same thing. I just rest the dipstick on the threads and take a reading from there. Cheers! __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

06-09-2009, 02:20 PM	#5
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Sounds like you are good then. On my bike 1 quart gets me in the sight glass almost to the top. Allen __________________ You meet the nicest people on a Honda Clone.
	0

06-09-2009, 11:24 AM	#4
olryder Join Date: Jun 2009 Location: Edmonton, AB. Posts: 5	so I'm almost at one quart of oil. I did screw it all the way in to check the oil level. Just by resting on the threads i get in between low/high mark. Do you guys get any level from the level glass at all? Thanks Weldangrind & katoranger.
	0

06-09-2009, 02:37 PM	#6
suprf1y Join Date: Oct 2007 Location: SW Ontario Posts: 408	http://www.chinariders.net/modules.p...ewtopic&t=7634 Also, read the sticky at the top of this page.
	0

06-09-2009, 03:02 PM	#7
olryder Join Date: Jun 2009 Location: Edmonton, AB. Posts: 5	thanks again guys, now i feel more comfortable running it.
	0