Falcon 250cc

Pluk504 · 05-14-2020, 01:04 AM

Can anyone help i got a falcon 250cc automatic and i assembled it but it won't start the lights are on but won't start

**JerryHawk250** · 05-14-2020, 08:04 AM

when you say won't start, do you mean the starter won't turn are as in the engine will crank and won't run? If the starter won't turn make sure that you have it in neutral and/or clutch pulled. some bikes have a safety switch on the kick stand so the the kick stand has to be up in order to start. Some bike require the brake to be applied to start.

If it cranks but not start, make sure that the kill switch is not on.

Pluk504 · 05-14-2020, 01:22 PM

Quote:

Originally Posted by JerryHawk250

when you say won't start, do you mean the starter won't turn are as in the engine will crank and won't run? If the starter won't turn make sure that you have it in neutral and/or clutch pulled. some bikes have a safety switch on the kick stand so the the kick stand has to be up in order to start. Some bike require the brake to be applied to start.

If it cranks but not start, make sure that the kill switch is not on.

it does nothing just lights comes on and tgeres no neutral its an automatic but battery came with acid packs and i tested it it said 66 percent so ill go try it later to see if it started i charged battery

**JerryHawk250** · 05-14-2020, 01:26 PM

Quote:

Originally Posted by Pluk504

it does nothing just lights comes on and tgeres no neutral its an automatic but battery came with acid packs and i tested it it said 66 percent so ill go try it later to see if it started i charged battery

I knew that,

What was i thinking. lol Make sure the battery is fully charged. More than likely you will have to apply the right brake lever and possibly have the kick stand up if it has a safety switch.

Pluk504 · 05-20-2020, 02:45 PM

Quote:

Originally Posted by JerryHawk250

I knew that,

What was i thinking. lol Make sure the battery is fully charged. More than likely you will have to apply the right brake lever and possibly have the kick stand up if it has a safety switch.

Hey thanks i found problem the cable on handle bar power switch was unplugged lol

05-14-2020, 01:04 AM	#1
Pluk504 Join Date: May 2020 Posts: 7	Falcon 250cc Can anyone help i got a falcon 250cc automatic and i assembled it but it won't start the lights are on but won't start
	0

05-14-2020, 08:04 AM	#2
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,577	when you say won't start, do you mean the starter won't turn are as in the engine will crank and won't run? If the starter won't turn make sure that you have it in neutral and/or clutch pulled. some bikes have a safety switch on the kick stand so the the kick stand has to be up in order to start. Some bike require the brake to be applied to start. If it cranks but not start, make sure that the kill switch is not on. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0