Hawk or other 229cc engine based enduro setup database

jimwildman · 07-11-2017, 06:36 AM

Quote:

Originally Posted by Ariel Red Hunter

I didn't know that an Ariel Square Four was wierdo stuff, but I am always willing to be educated. Sorry you didn't find any useful stuff on Hawk Talk...ARH

so now your gonna ruin this thread too?

Ariel Red Hunter · 07-11-2017, 09:43 AM

Quote:

Originally Posted by jimwildman

so now your gonna ruin this thread too?

If you don't like what I write - don't read it...ARH

Megadan · 07-16-2017, 02:49 AM

Revised.
Bike: 2017 Hawk

Elevation: 1100ft

Carb: Mikuni VM26 "30mm" Clone

Jet sizes: Genuine Mikuni Jets - 27.5 Pilot. 117.5 Main, factory needle and needle jet.

Needle setting: 4th notch down from the top. (center also works, but I chose the "fatter" option)

Pilot screw turns: 1 1/4 (still needs a little fine tuning but close)

Relevant mods: Sprockets - 17 front, 43 rear. Uni pod filter, Ebay exhaust. Denso iridium plug, NGK XD05F plug cap with resistor removed and shortened plug wire.

Top speed: 70mph GPS on flat ground wth no wind.

Megadan · 07-29-2017, 10:59 PM

Bumping this thread so people are aware of it. Don't be afraid to post examples on here for others. With so many Mikuni clones out there, I think there could be a few more examples on here.

silva · 08-01-2017, 10:06 PM

Bike: 2016 hawk. .
Elevation: 6400
Carb: PZ30 98 main/stock pilot. Relevant mods: k&n air filter/box mod .Ebay exhaust. NGK BR8EIX plug.
Rotella T6. Valve cover oil cooler from mjstef.
JT non o-ring chain. 17/40 gearing. shinko 705 (rear) Top speed:75 mph, (gps)

pistolclass · 08-01-2017, 10:54 PM

2016 hawk:

$30 Makuni (fake) VM26
110 main
20 pilot
2 turns out
needle set on fattest setting.
Stock Air box
Stock exhaust
63 mph top speed
15 front
50 rear
set both intake and Exhaust to 0.05 mm

matt's digital cluster
MSR shifter
burrito tube

Hawk starts right up and there is no flat spot in the RPM range. Really happy with this set up.

07-16-2017, 02:49 AM	#3
Megadan Join Date: Apr 2017 Location: Omaha, NE Posts: 8,038	Revised. Bike: 2017 Hawk Elevation: 1100ft Carb: Mikuni VM26 "30mm" Clone Jet sizes: Genuine Mikuni Jets - 27.5 Pilot. 117.5 Main, factory needle and needle jet. Needle setting: 4th notch down from the top. (center also works, but I chose the "fatter" option) Pilot screw turns: 1 1/4 (still needs a little fine tuning but close) Relevant mods: Sprockets - 17 front, 43 rear. Uni pod filter, Ebay exhaust. Denso iridium plug, NGK XD05F plug cap with resistor removed and shortened plug wire. Top speed: 70mph GPS on flat ground wth no wind. __________________ Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 Last edited by Megadan; 04-10-2019 at 11:11 PM.
	0

07-29-2017, 10:59 PM	#4
Megadan Join Date: Apr 2017 Location: Omaha, NE Posts: 8,038	Bumping this thread so people are aware of it. Don't be afraid to post examples on here for others. With so many Mikuni clones out there, I think there could be a few more examples on here. __________________ Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124
	0

08-01-2017, 10:06 PM	#5
silva Join Date: Jan 2017 Posts: 37	hawk 250 Bike: 2016 hawk. . Elevation: 6400 Carb: PZ30 98 main/stock pilot. Relevant mods: k&n air filter/box mod .Ebay exhaust. NGK BR8EIX plug. Rotella T6. Valve cover oil cooler from mjstef. JT non o-ring chain. 17/40 gearing. shinko 705 (rear) Top speed:75 mph, (gps) Last edited by silva; 08-01-2017 at 11:58 PM.
	1

08-01-2017, 10:54 PM	#6
pistolclass Join Date: Oct 2015 Location: connecticut Posts: 978	2016 hawk: $30 Makuni (fake) VM26 110 main 20 pilot 2 turns out needle set on fattest setting. Stock Air box Stock exhaust 63 mph top speed 15 front 50 rear set both intake and Exhaust to 0.05 mm matt's digital cluster MSR shifter burrito tube Hawk starts right up and there is no flat spot in the RPM range. Really happy with this set up.
	0