What Did You Do To Your Dual Sport Today?

**JerryHawk250** · 03-13-2017, 10:12 AM

Quote:

Originally Posted by chuck

I posted some pictures and of it when and how I made it it's on Hawk skid plate suggestions.

Okay, Found it. I need to go fill my shield gas bottle up and get busy. Nice job Chuck.

chuck · 03-13-2017, 12:35 PM

Quote:

Originally Posted by JerryHawk250

Okay, Found it. I need to go fill my shield gas bottle up and get busy. Nice job Chuck.

Thanks JerryHawk250,go for it.

chuck · 03-13-2017, 06:25 PM

Quote:

Originally Posted by chuck

Thanks JerryHawk250,go for it.

Nasa should gather all chinariders together and I will promise you, we will have a capsule that will get us to Mars in 5 days.

BlackBike · 03-13-2017, 08:49 PM

Quote:

Originally Posted by chuck

Nasa should gather all chinariders together and I will promise you, we will have a capsule that will get us to Mars in 5 days.

You don't want to be on my part of the ship which would have gorilla glue and duct tape somewhere in it

chuck · 03-14-2017, 12:34 PM

Quote:

Originally Posted by BlackBike

You don't want to be on my part of the ship which would have gorilla glue and duct tape somewhere in it

That's how we're going to get there and beyond......

oldscooter · 03-14-2017, 08:51 PM

Installed 17 tooth sprocket and a led headlight bulb. Too cold and rainy to test ride. The bulb is very bright. $15 so I wonder how long it will last.

Ariel Red Hunter · 03-15-2017, 07:27 PM

Quote:

Originally Posted by oldscooter

Installed 17 tooth sprocket and a led headlight bulb. Too cold and rainy to test ride. The bulb is very bright. $15 so I wonder how long it will last.

If it is not fan cooled, it won't last long in summer heat.....ARH

Edgar · 06-30-2017, 04:16 AM

Quote:

Originally Posted by JerryHawk250

Okay, Found it. I need to go fill my shield gas bottle up and get busy. Nice job Chuck.

Hi there, does anyone here perhaps have a blueprint / technical drawing of a similar bash plate? I want to make my own one for my 200cc bike.

Any help is appreciated.

E

chuck · 07-10-2017, 03:32 PM

Quote:

Originally Posted by Edgar

Hi there, does anyone here perhaps have a blueprint / technical drawing of a similar bash plate? I want to make my own one for my 200cc bike.

Any help is appreciated.

E

The second one I built is made out of 1/4 inch aluminum plate and better looking.I will post some pictures and blueprint numbers for the first one I made the one you posted.

03-14-2017, 08:51 PM	#6
oldscooter Join Date: Feb 2017 Location: North Alabama Posts: 62	Installed 17 tooth sprocket and a led headlight bulb. Too cold and rainy to test ride. The bulb is very bright. $15 so I wonder how long it will last.
	1