LOTS of LIFAN GY-5 parts AND motor parts - Page 4

Wild_Alaskan · 04-01-2014, 04:48 PM

i think i have the kick stand and would give you that for $5 as well

LifanRider70 · 04-01-2014, 08:51 PM

Can you post some pictures of the rear fender and the kickstand?? Thanks

Wild_Alaskan · 04-01-2014, 09:50 PM

as I said I wont be in town for another month, I'm a few thousand miles away from the parts for now.

will be happy to when im back though

carguyty · 05-01-2014, 09:32 AM

Quote:

Originally Posted by Wild_Alaskan

as I said I wont be in town for another month, I'm a few thousand miles away from the parts for now.

will be happy to when im back though

Is there any chance you still have the passenger peg assembly? I know this thread is old and you won't be back to the parts for another week or so. I just wanted to ask before I forget.

Weldangrind · 05-01-2014, 10:03 AM

If he doesn't, I might. Let's wait until Wild Alaskan responds.

Wild_Alaskan · 05-01-2014, 11:24 AM

I do have them but you could get them from weldandgrind if you dont want to wait a week.

Weldangrind · 05-01-2014, 11:24 PM

Can you wait, Carguyty?

carguyty · 05-02-2014, 07:49 PM

Quote:

Originally Posted by Weldangrind

Can you wait, Carguyty?

I totally can wait! It would need to be after the 15th before I can make a move anyway. I've also heard that shipping anything through Canada that is over 4 pounds is pretty pricey.

Wild_Alaskan · 05-02-2014, 08:21 PM

shipping shouldn't be an issue I can probably fit them in a $5 priority flat rate box or something. the big things are more of a pain

carguyty · 05-03-2014, 03:02 PM

My brother.

I just went out to check on the mounting points and there are none! So scratch the pegs. I'm going to have to rent a welder and do something custom. Thank you so much any way.

Wild_Alaskan · 05-03-2014, 04:10 PM

no worries, but if you wanted the triangle mounts off the frame also I could chop those off for you.

carguyty · 05-03-2014, 09:10 PM

Quote:

Originally Posted by Wild_Alaskan

no worries, but if you wanted the triangle mounts off the frame also I could chop those off for you.

Well if you don't mind. Something already fabbed beats me building a jig for something I'll probably do only once.

Thank you!

Wild_Alaskan · 05-08-2014, 03:10 AM

now that i have looked at the bike, those triangles holding the pegs may take a bit of work as is, one is still stock but the other is about an inch shorter on the bottom and more material will have to be added to it. when i put the 400cc motor in it a section of frame it mounted to was moved back.

If you still want them let me know

pchitti · 05-08-2014, 04:29 PM

any mirrors? lol

Wild_Alaskan · 05-08-2014, 04:46 PM

i do have some aftermarket mirrors floating around, you can probably find them on ebay for what it would cost me to ship them from here though,

04-01-2014, 04:48 PM	#46
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	i think i have the kick stand and would give you that for $5 as well __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

04-01-2014, 09:50 PM	#48
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	as I said I wont be in town for another month, I'm a few thousand miles away from the parts for now. will be happy to when im back though __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

05-01-2014, 10:03 AM	#50
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	If he doesn't, I might. Let's wait until Wild Alaskan responds. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

05-01-2014, 11:24 AM	#51
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	I do have them but you could get them from weldandgrind if you dont want to wait a week. __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

05-01-2014, 11:24 PM	#52
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Can you wait, Carguyty? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

04-01-2014, 08:51 PM	#47
LifanRider70 Join Date: Mar 2014 Posts: 3	Can you post some pictures of the rear fender and the kickstand?? Thanks
	0

05-02-2014, 08:21 PM	#54
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	shipping shouldn't be an issue I can probably fit them in a $5 priority flat rate box or something. the big things are more of a pain __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

05-03-2014, 03:02 PM	#55
carguyty Join Date: Apr 2014 Location: Bremerton, WA Posts: 30	My brother. I just went out to check on the mounting points and there are none! So scratch the pegs. I'm going to have to rent a welder and do something custom. Thank you so much any way.
	0

05-03-2014, 04:10 PM	#56
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	no worries, but if you wanted the triangle mounts off the frame also I could chop those off for you. __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

05-08-2014, 03:10 AM	#58
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	now that i have looked at the bike, those triangles holding the pegs may take a bit of work as is, one is still stock but the other is about an inch shorter on the bottom and more material will have to be added to it. when i put the 400cc motor in it a section of frame it mounted to was moved back. If you still want them let me know __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

05-08-2014, 04:29 PM	#59
pchitti Join Date: Mar 2014 Posts: 165	any mirrors? lol
	0

05-08-2014, 04:46 PM	#60
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	i do have some aftermarket mirrors floating around, you can probably find them on ebay for what it would cost me to ship them from here though, __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0