11-18-2013, 07:54 PM
|
#1 |
Join Date: Nov 2013
Location: Bellavista,AR
Posts: 10
|
bushings
I know viva motorsports went out of business so getting swing arm bushings from them isn't happening. And. My search for other quads with the same bushings has cost me $60 worth of bushing that only fit the front. Is there anywhere to find them or can I make them from polyurethane shore 80? Never made a bushing before but seems like my only option.
|
|
|
11-19-2013, 12:31 AM
|
#2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
You could certainly make your own. My buddy made a set for MidlifeKrisis out of UMHW plastic, and they're holding up well. If you got lucky enough to find a hole saw that matched the OD, you could cut the basic shape and then drill the ID to suit.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
11-19-2013, 05:52 PM
|
#3 |
|
Join Date: Jan 2011
Location: Chilliwack, B.C., Canada eh
Posts: 1,393
|
the bushings that Weldangrind had his friend make for the wifes 150 atv are still holding up great
__________________
I could be wrong......it has been known to happen<div><br /></div><div>core directive 172: No member of the core shall report for duty wearing a ginger toupee</div> |
|
|
|
|
|
 |
|
|
Linear Mode
